Announcement

Collapse
No announcement yet.

Jeep Hitch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeep Hitch

    I made this about a year ago with a set of torches and a a set of files. its two pices of 3/8 plate for the front and back and 2'' tubing for the hitch. Just somthing to dress up the jeep.
    Attached Files

  • #2
    nice work expecially for torches and files
    have you upgraded to a welder and a grinder?
    This is an automotive discussion forum that has some great infromation

    www.autobodytoolmart.com/shoptalk

    Comment


    • #3
      I have a whole shop full of everything you can think of I juust kinda wanted a challange. and I also used a 9'' dewalt grinder for the finish touch.
      Last edited by m.k.swelding; 04-28-2009, 06:27 PM.

      Comment


      • #4
        trailblaser 302?
        302 air pac ?
        bridgeport mill?
        cnc plasma cutter?
        cnc laser cutter?
        anything you can ship to me to allow me to barrow?
        This is an automotive discussion forum that has some great infromation

        www.autobodytoolmart.com/shoptalk

        Comment


        • #5
          looks good

          Last edited by thunder71; 04-28-2009, 06:35 PM.

          Comment


          • #6
            Jeep ?

            Originally posted by m.k.swelding View Post
            I made this about a year ago with a set of torches and a a set of files. its two pices of 3/8 plate for the front and back and 2'' tubing for the hitch. Just somthing to dress up the jeep.
            Hi; When you made it did you use Two Pieces of Flat Bar?
            Burn Out the Letters on the First, File them out, then Weld the second piece of Flat Bar on the back?? Just Curious ?

            ............ Norm
            sigpic
            Sunrise Outside My Shop In Delhi, Ontario

            - Arcair- K 4000 CAC.

            - LN-25 Wire Feeder

            - Lincoln Ranger 8- Engine Drive- CC\CV:



            - Lincoln Power Mig 180C
            - Spoolgun.
            - DeWalt Chop Saw .
            - DeWalt Compressor - 13cfm, @ 100 psi.

            www.normsmobilewelding.blogspot.com

            Comment


            • #7
              Originally posted by nfinch86 View Post
              Hi; When you made it did you use Two Pieces of Flat Bar?
              Burn Out the Letters on the First, File them out, then Weld the second piece of Flat Bar on the back?? Just Curious ?

              ............ Norm
              yes i did then from the back i plug welded the insides of the Es and Ps.

              Comment


              • #8
                what no LED lighting with hand blown glass? just playing looks nice.
                TB 325
                TB 302
                dynasty 200sd
                spoolmatic 30a/wc24
                suitcase x-treme 12vs
                miller 211
                evolution rage 2

                Comment

                Working...
                X