Announcement

Collapse
No announcement yet.

Bending Brake

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bending Brake

    Has anyone here built the bending brake in the welding projects section here on millerwelds? Just wondering how it turned out and if you'd build it again.
    Millermatic 180w/autoset
    Spoolmate 100
    Victor O & A Outfit

  • #2
    look on page 13 on projects titlled < a scroll bender and brake> I built one useing his pitures. I will put pics of mine on tomorrow

    Comment


    • #3
      hi PJW

      Here is a link to the bender/brake that I built. I looked at a few pics from around the site and made the best with what steel that I had. Mine is a little on the heavy side I am thinking that I want to use this bender for the sheet metal maybe up to 1/8, and build a nice press brake for making brackets and such.

      http://picasaweb.google.com/keesfrie...eat=directlink

      Good Luck and Please post pics when you start your build.

      Miller 211 A.S. and Spoolmate 100
      Stickmate LX 235 AC / 160 DC.
      Clarke 180 EN Just in case
      Spectrum 375 X-Treme.
      O/A Medium Radnor Torch, Large Victor Torch.
      Milwaukee 14" Chop Saw.
      4 x 6 Horizontal Band Saw.
      Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
      Jackson Passive shade #5 for the plasma.
      I almost forgot the Hobart XVP AD Hood.


      Projects and Misc Albums
      http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

      Comment


      • #4
        Here's the pictures of the bending brake.
        Attached Files

        Comment

        Working...
        X