Announcement

Collapse
No announcement yet.

Gantry Crane Winching System?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gantry Crane Winching System?

    Hi All,

    I recently completed building a gantry crane I purchased from here: Gantry Crane Plans. I'll post some pics when I get it back, just finished it and a friend already borrowed it. After getting it all together, I realized how much of a pain it is to raise and lower the height of the I-Beam. I was wondering if anybody has built one of these and put a cable winching system on one? I think that would make it a lot easier to adjust the height. I saw a gantry crane on the Harbour Freight website that has a winching system but can't tell how it works from the picture on the site.

    Any help would be greatly appreciated.

    Craig

  • #2
    if you down load the manual for the crane there is a parts diagram that will show you how to build it and how it works
    Miller Syncrowave 200 W/Radiator 1A & water cooled torch
    Millermatic 252 on the wish list
    Bridgeport Mill W/ 2 axis CNC control
    South bend lathe 10LX40
    K.O. Lee surface grinder 6X18
    Over 20 years as a Machinist Toolmaker
    A TWO CAR garage full of tools and a fridge full of beer
    Auto shades are for rookies
    www.KLStottlemyer.com

    Comment

    Working...
    X