Announcement

Collapse
No announcement yet.

1987-1995 Nissan Pathfinder Class III Receiver Hitch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1987-1995 Nissan Pathfinder Class III Receiver Hitch

    Hello
    I am looking for drawings, or plans for a 1987-1995 Nissan Pathfinder Class III Receiver Hitch. I am currently stationed overseas and buying/shipping a receiver hitch over here is cost prohibitive. I would like to manufacture a hitch for my 1995 Nissan Pathfinder. I would also like to manufacture a cargo carrier to attach to the tow hitch. Can anyone point me in the right direction? I move back to States in June and I need the hitch/cargo carrier for my drive from MD to TX.

    Thanks

  • #2
    try google and copy style from any manufacturers pictures (Reese, drawtite)
    TB 325
    TB 302
    dynasty 200sd
    spoolmatic 30a/wc24
    suitcase x-treme 12vs
    miller 211
    evolution rage 2

    Comment


    • #3
      "Hitched"

      hey volky: They go for about $130, would it be cheaper just to have one installed when you get back Stateside?

      Dave
      "Bonne journe'e mes amis"

      Comment


      • #4
        Originally posted by davedarragh View Post
        hey volky: They go for about $130, would it be cheaper just to have one installed when you get back Stateside?

        Dave
        Indeed.

        Pick one up at just about any Auto Parts store
        Ed Conley
        http://www.screamingbroccoli.net/
        MM252
        MM211
        Passport Plus w/Spool Gun
        TA185
        Miller 125c Plasma 120v
        O/A set
        SO 2020 Bender
        You can call me Bacchus

        Comment


        • #5
          Originally posted by Broccoli1 View Post
          Indeed.

          Pick one up at just about any Auto Parts store
          I only have about 24 hours in MD. So I do not have much time to waste once I get there. I have to report to my new duty station in TX in 4 days. I rather have everything ready to go, so all I have to do is pick up the truck from port and start my drive besides I wanted to fabricate it if at all possible.
          Thanks

          Comment


          • #6
            Where in MD do you leave from?

            Just curious
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment


            • #7
              There's gotta be a Pathfinder forum that someone has made one that could probably help you out on the dimensions- but honestly there's not much to them- Hardest part is the Mounting brackets.
              Attached Files
              Ed Conley
              http://www.screamingbroccoli.net/
              MM252
              MM211
              Passport Plus w/Spool Gun
              TA185
              Miller 125c Plasma 120v
              O/A set
              SO 2020 Bender
              You can call me Bacchus

              Comment


              • #8
                Assuming the vehicle is with you, should be easy enough to design it and build it in place,,,,,,, if not, you still gotta install it, seems easier and cheaper to just call ahead to the closest auto parts, have the part waiting for you when you get there, takes 20 minutes to put it on.
                Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....

                Comment

                Working...
                X