Announcement

Collapse
No announcement yet.

Brake is finished / still working on CAD

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake is finished / still working on CAD

    Here's the last set of pics of my sheet brake.

    I finished this project with a smile. So far it has preformed as planned. My goal was to bend sheet metal up to 1/8" for drawers and tool boxes. I would also like to use it to bend brackets up to 1/4" until I can build a press brake.





    I do have a set of handles for the heavy stuff but there not needed for sheet metal such as in the lower right corner of the second set of pics. In time I would like to fab some sort of a spring mechanism that would have the clamp down plate preloaded in the up position. For now I am just using a washer and a nut on the clamping bolt on each side. Effective but not pretty.

    I do plan on finishing my 3D CAD for this. If anyone would like more pics or the part of the cad that is finished just pm me and I can send or post.

    Thanks for looking, If anyone happens to see an area for improvement please say so.

    Tom

    Miller 211 A.S. and Spoolmate 100
    Stickmate LX 235 AC / 160 DC.
    Clarke 180 EN Just in case
    Spectrum 375 X-Treme.
    O/A Medium Radnor Torch, Large Victor Torch.
    Milwaukee 14" Chop Saw.
    4 x 6 Horizontal Band Saw.
    Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
    Jackson Passive shade #5 for the plasma.
    I almost forgot the Hobart XVP AD Hood.


    Projects and Misc Albums
    http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

  • #2
    Kinda hard to see from the small pics,but it looks good from what i can see.
    2- XMT's 350 cc/cv
    1- Blue star 185
    1- BOBCAT 250
    1- TRAILBLAZER 302
    1- MILLER DVI
    1- PASSPORT PLUS
    1- DYNASTY 200 DX
    1- MAXSTAR 150 STL
    1- HF-251 BOX
    1- S-74d
    1- S-75DXA
    2- 12-RC SUITCASES
    1- 8-VS SUITCASE
    2- 30 A SPOOLGUNS

    Comment


    • #3
      looks like it turned out to work quite well. good job
      sigpic
      Miller Trailblazer 302
      Smith Torch Outfit
      Lots of Grinders
      Miller Elite Autodark Hood
      O'l Trusty Jackson

      Comment


      • #4
        looks good

        Comment


        • #5
          Nice job!
          I will be looking for a set of drawings when their done!

          Comment


          • #6
            Sorry for the pic issues, I was trying something new and it didnt work as well as I thought it would.

            Groove, I will post as soon as I manage to fumble my way thru the 3D stuff, my skills are poor in that area tho so it may take a few weeks. Fair weather tends to draw me outdoors. Good weather makes for a good reason to cut, bend, and weld.

            Thanks for taking the time to look.

            Miller 211 A.S. and Spoolmate 100
            Stickmate LX 235 AC / 160 DC.
            Clarke 180 EN Just in case
            Spectrum 375 X-Treme.
            O/A Medium Radnor Torch, Large Victor Torch.
            Milwaukee 14" Chop Saw.
            4 x 6 Horizontal Band Saw.
            Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
            Jackson Passive shade #5 for the plasma.
            I almost forgot the Hobart XVP AD Hood.


            Projects and Misc Albums
            http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

            Comment


            • #7
              Originally posted by tom37 View Post
              Sorry for the pic issues, I was trying something new and it didnt work as well as I thought it would.

              Groove, I will post as soon as I manage to fumble my way thru the 3D stuff, my skills are poor in that area tho so it may take a few weeks. Fair weather tends to draw me outdoors. Good weather makes for a good reason to cut, bend, and weld.

              Thanks for taking the time to look.
              I have been following this all along, good job. Anxious to see your CAD diagrams
              Geezer
              Miller 175
              Power MIG 255c
              Ranger 8
              1974 Wisconsin 5K AC Only (Cherry)
              Spool Gun
              185 TIG
              Victor/Harris O/A

              Comment


              • #8
                Thanks for the pleasant words everyone. I know that I am far from prefect, although with all the nice good words I feel as if I am learning and getting better slowly. Practice and little steps is what it takes I hear.

                Please dont expect to much on the drawings guys, thats a new can of worms that I have just started to open.

                Thanks again, it really feels good to hear nice thoughts from others about projects.

                Miller 211 A.S. and Spoolmate 100
                Stickmate LX 235 AC / 160 DC.
                Clarke 180 EN Just in case
                Spectrum 375 X-Treme.
                O/A Medium Radnor Torch, Large Victor Torch.
                Milwaukee 14" Chop Saw.
                4 x 6 Horizontal Band Saw.
                Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
                Jackson Passive shade #5 for the plasma.
                I almost forgot the Hobart XVP AD Hood.


                Projects and Misc Albums
                http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

                Comment


                • #9
                  UPDATE (cad pics)

                  Alright here is three 3-D cad pics that I exported into a 2-D jpeg. Please keep in mind that I am no expert by any means. I want to learn it to the point that if I want to crank out a quick drawing and have it to scale, and ready to build from, I can.







                  If someone wants the sketch-up file I will gladly send it to ya. I am still trying to learn how to make my drawing open in a link that will let it be manipulated right in that screen, with out using sketch-up.

                  I am positive that my drawings dont hold a candle to most, but its a start.

                  If anyone is going to use the numbers for a build PLEASE PLEASE double check the math. This is where I started for my build, and I most likely deviated from the plan slightly, forgetting to update the cad. ?? That is normal isnt it ??

                  Tom

                  Miller 211 A.S. and Spoolmate 100
                  Stickmate LX 235 AC / 160 DC.
                  Clarke 180 EN Just in case
                  Spectrum 375 X-Treme.
                  O/A Medium Radnor Torch, Large Victor Torch.
                  Milwaukee 14" Chop Saw.
                  4 x 6 Horizontal Band Saw.
                  Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
                  Jackson Passive shade #5 for the plasma.
                  I almost forgot the Hobart XVP AD Hood.


                  Projects and Misc Albums
                  http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

                  Comment


                  • #10
                    That's what I don't like about most of the free CAD programs. They seem harder to figure out, although I learned on AutoCAD. Also, the only bad thing about AutoCAD is that it's about a $1200 program
                    sigpic
                    Miller Trailblazer 302
                    Smith Torch Outfit
                    Lots of Grinders
                    Miller Elite Autodark Hood
                    O'l Trusty Jackson

                    Comment


                    • #11
                      I needed a wrench to adjust and tighten my bolts and didn't want to use a good wrench. While I was at a pawn shop a few days ago I picked up several 3/4 chi-pan sockets for pennys a piece. Now I have a wrench and a place to store it.

                      The new pics are the last 5 pics in the album.

                      http://picasaweb.google.com/keesfrie...eat=directlink

                      Thanks for looking.
                      Tom

                      Miller 211 A.S. and Spoolmate 100
                      Stickmate LX 235 AC / 160 DC.
                      Clarke 180 EN Just in case
                      Spectrum 375 X-Treme.
                      O/A Medium Radnor Torch, Large Victor Torch.
                      Milwaukee 14" Chop Saw.
                      4 x 6 Horizontal Band Saw.
                      Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
                      Jackson Passive shade #5 for the plasma.
                      I almost forgot the Hobart XVP AD Hood.


                      Projects and Misc Albums
                      http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

                      Comment


                      • #12
                        nice brake, great post. Daye

                        Comment


                        • #13
                          I can't help but notice you have the capability to lay down some really nice welds in a variety of situations...what machine or machines do you have?
                          Heck why not post them up in your signature and your location as well?
                          It looks to me as tho you are a valuable poster and I welcome you to the forum
                          What this thread does for me is make me think about ways I could beef up my POS Grizzly pan and box finger brake.
                          THANKS!

                          www.facebook.com/outbackaluminumwelding
                          Miller Dynasty 700...OH YEA BABY!!
                          MM 350P...PULSE SPRAYIN' MONSTER
                          Miller Dynasty 280 with AC independent expansion card
                          Miller Dynasty 200 DX "Blue Lightning"

                          Miller Bobcat 225 NT (what I began my present Biz with!)
                          Miller 30-A Spoolgun
                          Miller WC-115-A
                          Miller Spectrum 300
                          Miller 225 Thunderbolt (my first machine bought new 1980)
                          Miller Digital Elite Titanium 9400

                          Comment


                          • #14
                            Thank You TIGMUSKY and FusionKing.

                            At this point I am not sure but I believe that my welds are a little bit of skill and a ton of luck. My brake has worked well, so far I have no complaints other then I built it way to heavy. The thing probably weighs in near 40 or 50 lbs. I do need to scribe lines in the lift side to make it easy to square my work before I bend it.

                            Thanks Tom

                            Miller 211 A.S. and Spoolmate 100
                            Stickmate LX 235 AC / 160 DC.
                            Clarke 180 EN Just in case
                            Spectrum 375 X-Treme.
                            O/A Medium Radnor Torch, Large Victor Torch.
                            Milwaukee 14" Chop Saw.
                            4 x 6 Horizontal Band Saw.
                            Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
                            Jackson Passive shade #5 for the plasma.
                            I almost forgot the Hobart XVP AD Hood.


                            Projects and Misc Albums
                            http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

                            Comment

                            Working...
                            X