Announcement

Collapse
No announcement yet.

Help please

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help please

    I `am trying to find a website that someone posted,it had only millers and they was alot cheaper , but i can`t find it i searched on here and yahoo

    Inferno Forge

    Chris

  • #2
    Cyberweld.com

    Comment


    • #3
      thanks , but it was something else

      Inferno Forge

      Chris

      Comment


      • #4
        you could try searching on www.froogle.com or www.resellerratings.com
        Dynasty 200DX
        MM252 w/ Spoolmatic 30A
        Spectrum 675

        Comment


        • #5
          I bought my Dynasty from IOC: Indiana Oxygen Company. They're on ebay and I think they have their own site now. Cheaper than Cyberweld...

          -James

          Comment


          • #6
            Better price?

            brwelder.com has a better price on a 375 extreme today than cyberweld.

            Comment


            • #7
              whatever this was had all of the miller line but alot cheaper

              Inferno Forge

              Chris

              Comment


              • #8
                B&R usually has the best price by a few $'s, IOC is usually within $10 of B&R. i got all my stuff from IOC (MIG and Plasma)except my BWE that i got from B&R as i thought i would give them a try, i went back to IOC for my TA-185 (TIG) but many are happy with B&R i just prefer IOC. both IOC and B&R will have the hole miller line.
                print out the sale page from whoever and take it to your local guy to see if he will match it some will some wont.
                what ya shopping for???
                thanks for the help
                ......or..........
                hope i helped
                sigpic
                feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
                summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
                JAMES

                Comment


                • #9
                  Originally posted by wireburner View Post
                  whatever this was had all of the miller line but alot cheaper
                  Are you talking about this place?

                  http://www.miller4less.com/
                  Regards, George

                  Hobart Handler 210 w/DP3035 - Great 240V small Mig
                  Hobart Handler 140 - Great 120V Mig
                  Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                  Miller Dynasty 200DX with cooler of my design, works for me
                  Miller Spectrum 375 - Nice Cutter

                  Comment


                  • #10
                    sudnown

                    has anyone used Miller4less? Their prices seem really good! Just scared of buying stuff that cost a lot of money over the internet then can't fix it later locally...Want to know if they are really reputable...
                    thanks,
                    bert
                    I'm not late...
                    I'm just on Hawaiian Time

                    Comment


                    • #11
                      a miller welder/product can be repaired at any reputable authorized dealer regardless of where you buy it. my LWS told me that when i was looking at getting my MIG on line. and although i have never needed service on amy of my Miller equipment over the last 6 years i have had them i know i could have taken it to my LWS for service should i need it. thats a big part of why i spent the extra $$ to get a miller. as you said its a lot of $$ i don't want to spend all that $ only to have it break 6 months later and end up with a paper wait because i cant get it fixed. my LWS is also an authorized thermal arc repair and seller so i can get service for it locally also. the $ i spent on it was very hard to come by and i did not want to risk a paper wait with it aether. you should always look into service options in your area be for you buy any brand. miller is good about having an option almost any where but thermal arc was at the time not so well covered by service so i checked be for purchasing. if i could not get local service i would have stuck it out and kept saving till i could afford the dyn200, probably another year. i also got my TA-185 at ioc and had a service issue with it when i got it and it was covered and taken care of locally with no down time..
                      thanks for the help
                      ......or..........
                      hope i helped
                      sigpic
                      feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
                      summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
                      JAMES

                      Comment


                      • #12
                        Originally posted by Bert View Post
                        has anyone used Miller4less? Their prices seem really good! Just scared of buying stuff that cost a lot of money over the internet then can't fix it later locally...Want to know if they are really reputable...
                        thanks,
                        bert
                        Haven't used them, but I have used IOC with very good experience. They are a real welding supplier btw. I noticed that IOC is also cheaper.
                        Careful with That Axe, Eugene

                        Comment


                        • #13
                          if you are only talking about $10-20 diference go with IOC. i used them for all my welding and cutting power scorces and they are top notch. you get tracking numbers in your e-mail and the dilivery is fast. they are great to deal with.
                          thanks for the help
                          ......or..........
                          hope i helped
                          sigpic
                          feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
                          summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
                          JAMES

                          Comment


                          • #14
                            yah that is it thank y`all

                            Inferno Forge

                            Chris

                            Comment


                            • #15
                              Dynasty/tent sale

                              Just got back from the tent sale. Bought 3 pairs of welding gloves for $3.60 a pair. They had one contractor's kit left, but I didn't buy it. I ran into an old co-worker and he said he purchased the whole Dynasty 200DX package with the contractor's kit a few months ago. Price was like he got the contractor's kit for free! Since I got the machine already, I'm looking at IOC's e-bay store to see only what the kit cost. Can't find it yet.
                              I'm not late...
                              I'm just on Hawaiian Time

                              Comment

                              Working...
                              X