Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

welding razor blades

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • welding razor blades

    I saw there wasn't any thread on here yet about welding razor blades togather so I figured might as well start one. here's one I done, it's pretty easy. I was using the syncrowave at work, i can't remember the amps

    Name:  e318e07273b5e00761de43cb9faf7e94.jpg
Views: 1
Size:  76.8 KB

    Name:  e92c5d3079ab36f67f61822572ee228e.jpg
Views: 1
Size:  79.8 KB

    Name:  d4774c300a4c3de27c16969a1b6efe47.jpg
Views: 1
Size:  72.3 KB

  • #2
    my cousin showed me that that is cool

    Comment


    • #3
      those are not razor blades, there much thicker than real razor blades.
      but thats a nice weld.

      Comment


      • #4
        Originally posted by fun4now View Post
        those are not razor blades, there much thicker than real razor blades.
        but thats a nice weld.
        Picky picky. Dam, I'll try to get some real ones and try again

        Comment


        • #5
          Is there a particular use for this or are you just proving you can?

          Comment


          • #6
            yep its a just to show i can kind of thing. just like welding the 2 beer cans togather for aluminum can do thing.

            Comment


            • #7
              Are those actually welded together with filler rod or just fused together? Dave

              Comment


              • #8
                Originally posted by fun4now View Post
                those are not razor blades, there much thicker than real razor blades.
                but thats a nice weld.
                The fact that he welded the thin edges together without burning holes through them is a feat in itself..........good job

                Comment


                • #9
                  not saying it isent a good job. just thought i would throw out the not realy razor blades nicely befor some one did it much ruder. as has happend in the past. nothing against the weld.

                  Comment


                  • #10
                    Originally posted by monte55 View Post
                    The fact that he welded the thin edges together without burning holes through them is a feat in itself..........good job
                    With the right machine, it's actually quite easy.

                    Now do it with an Acetylene torch, that would be impressive!

                    Comment


                    • #11
                      Originally posted by TS-Off-Road View Post
                      With the right machine, it's actually quite easy.

                      Now do it with an Acetylene torch, that would be impressive!
                      Everything is easy if you know how

                      Comment


                      • #12
                        i dont think i have a small enough tip, but i might give it a shot next time i get out to the shop with a few sec. to spare.

                        Comment


                        • #13
                          Try doing that while using filler.

                          It's a little harder but good practice and kind of fun.

                          Comment


                          • #14
                            practice

                            i think i'm going to go and dig some lawn mower blades out of the pile and practice welding them together! does that count??

                            thats about my skill level

                            nice welding on the razors!!

                            Comment


                            • #15
                              Lawnmower blades

                              Ha Ha....you could weld them together with a rosebud tip

                              Comment

                              Working...
                              X
                              Special Offers: See the latest Miller deals and promotions.