Announcement

Collapse
No announcement yet.

DFW area welders

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DFW area welders

    I am working on a project out of 1/4" plate. I had some pieces plasma cut but the design has changed slightly. I need to modify the current pieces. I need to plasma cut about 30" to get the new shape. It is all straight lines. If somebody in the area has a plasma that I could meet up with and get this taken care of, I'd be very indebted. I have used a friends plasma before but this is a tad to thick. I can supply a case of Frosty adult beverages of your choice for this help.

    Thanks in advance

    Scott

    safeprosek@gmail.com
    Miller 350P
    Miller Econotig
    Milwaukee Dry saw
    Evolution Dry saw (for sale)
    Scotchman 350 cold saw
    7x12 bandsaw
    1910 ATW 14 x 72 lathe
    fridge full of adult beverages
    Sirius radio

    www.snpequipment.com
    callouses and burns a plentysigpic

  • #2
    1/4 Steel Plate

    I'm in Phoenix, so I guess that's out of the question. I cut 1/4" and thicker all the time with my Extreme 375. Just take it a little slower.

    Hope you find some one, O/A torch would certainly work!

    Dave
    "Bonne journe'e mes amis"

    Comment


    • #3
      I'm in Longview Tx but i work night

      Comment

      Working...
      X