Announcement

Collapse
No announcement yet.

Holder for TIG Torch 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Holder for TIG Torch 1

    This is a duplicate post to the one on Hobart's Weld Talk. See other post for more comments:

    http://www.hobartwelders.com/weldtal...ad.php?t=32783

    Alexander (AlexGo) showed a TIG torch holder on the following posting:

    http://www.hobartwelders.com/weldtal...ghlight=holder

    *This is shown below as TIG Torch Holder 1.
    *I modified this in my SolidWorks CAD package to come up with my version of this design: TIG Torch Holder 2.
    *I decided that I didnít like the filler rods sticking up from the pipe so I eliminated it, and added a place for filler rods on the bottom. This resulted in: TIG Torch Holder 3.
    *I built this design which is shown as: TIG Torch Holder 3a.

    (Continued on the next Thread)
    Attached Files
    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport
    Miller Spectrum 375 Plasma Torch

  • #2
    Holder for TIG Torch 2

    *I tried it out TIG Torch Holder 3a and found that my monster gas lens for welding stainless steel didnít fit. I also didnít like fitting the nozzle into the hole while welding so I came with: TIG Torch Holder 4. This design uses an aluminum angle instead of a hole to hold the torch.
    *I built this design which is shown as: TIG Torch Holder 4a. I just tried it out tonight and so far I like it.

    This is a work in process so any other ideas would be appreciated.
    Attached Files
    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport
    Miller Spectrum 375 Plasma Torch

    Comment


    • #3
      nice job! Only thing is I'm bothered about is the tig wire laying underneath. Everytime you grab the torch, more crud and dust falls off your glove making the filler area really dirty.............
      good job, though!!!!!!!!!!!!!!!!
      I'm not late...
      I'm just on Hawaiian Time

      Comment


      • #4
        KBar, at first I just thought that someone deleted their posts. But that can't be the case, 'cause Don52 started the thread...think some guys crossed over from another thread. Some of the stuff that was quoted looks familiar.....
        bert
        I'm not late...
        I'm just on Hawaiian Time

        Comment


        • #5
          Boy, that's freaky. Started out with a great post by Don52 showing some creativity and went to a slugfest out of the blue. Weird

          Comment


          • #6
            The original poster deleted his post,it was between mine and berts.What he posted was quoted in redintn post.
            2- XMT's 350 cc/cv
            1- Blue star 185
            1- BOBCAT 250
            1- TRAILBLAZER 302
            1- MILLER DVI
            2- PASSPORT PLUS
            1- DYNASTY 200 DX
            1- DYNASTY 280 DX
            1- MAXSTAR 150 STL
            1- HF-251 BOX
            1- S-74D
            1- S-75DXA
            2- 12-RC SUITCASES
            1- 8-VS SUITCASE
            2- 30 A SPOOLGUNS

            Comment


            • #7
              Strange post

              I can see all deleted posts, and it was as you had observed, not just strange because of deletions. A guy was making a torch holder and then suddenly someone posted an unrelated Miller-bashing post. (and then there were posts in response to it) I deleted many of the responses, because that whole thing made no sense, but then realized that might make everyone even more confused, so just wanted to chime in and let everyone know what I was seeing. So...I wonder if it wasn't some type of spam? Very strange indeed.

              Comment


              • #8
                Thanks for that Admin

                Anyways.....I think the lawyer still lost
                I'm not late...
                I'm just on Hawaiian Time

                Comment


                • #9
                  Bert, no your not going crazy, my post was deleted too - lol.
                  Ken

                  What else is there besides welding and riding. Besides that

                  Miller Thunderbolt XL 300/200 AC/DC
                  Hobart Handler 187
                  Dewalt Chop Saw
                  4" Air Grinder
                  Die Grinder
                  Rigid Drill Press
                  Kellogg 10hp Air Compressor


                  2009 FXDC

                  Comment


                  • #10
                    I hope Don doesn't think we were saying those things to him!!

                    Thanks to Admin for the quick response.
                    RETIRED desk jockey.

                    Hobby weldor with a little training.

                    Craftsman O/A---Flat, Vert, Ovhd, Horz.

                    Miller Syncrowave 250.
                    sigpic

                    Comment


                    • #11
                      Originally posted by Craig in Denver View Post
                      I hope Don doesn't think we were saying those things to him!!

                      Thanks to Admin for the quick response.
                      I'm sure don knew it wasn't for or about him....unless he's s lawyer too!!!!
                      I'm not late...
                      I'm just on Hawaiian Time

                      Comment

                      Working...
                      X