Announcement

Collapse
No announcement yet.

Welding table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welding table

    I needed a welding table that was mobile and able to fit under my work bench. I used 3/8 plate for the top, 1/2 flat bar for the under edge and 1" square tube for the legs. Nothing heavy duty but perfect for my purpose. I also used 1/2 flat bar for a grounding spot on the lower right leg. I tigged the whole thing which took longer than it should have but it was good practice working out of position and using left and right hands. There's something to be said about laying on your belly/back using your knee/elbow to hit the pedal, never know when you'll actually have to use that skill for paid work. Thought of either painting it DeWalt yellow/black or Miller blue but went with Harley orange(Rustoleum real orange)/black instead.
    Attached Files
    Syncrowave 250 DX w/cooler
    Spectrum 625
    Millermatic 180 w/ autoset
    OCC Paul jr Elite helmet
    a couple Harleys, a dog and wife. In that order.

  • #2
    Nice looking table man.

    I only see one thing wrong ! There isnt anything piled up on it yet.

    Tom

    Miller 211 A.S. and Spoolmate 100
    Stickmate LX 235 AC / 160 DC.
    Clarke 180 EN Just in case
    Spectrum 375 X-Treme.
    O/A Medium Radnor Torch, Large Victor Torch.
    Milwaukee 14" Chop Saw.
    4 x 6 Horizontal Band Saw.
    Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
    Jackson Passive shade #5 for the plasma.
    I almost forgot the Hobart XVP AD Hood.


    Projects and Misc Albums
    http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )

    Comment

    Working...
    X