Announcement

Collapse
No announcement yet.

Mig and Plamsa rack for by Syncrowave 250

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mig and Plamsa rack for by Syncrowave 250

    I've got a small garage so I had to come up with something to make a smaller footprint. I was originally concerned about the weight on the tigrunner running gear but after several "test", not worried about it anymore. It's working great!
    Attached Files
    Last edited by charleskmoore2; 12-16-2008, 03:17 PM.
    Syncrowave 250 DX w/cooler
    Spectrum 625
    Millermatic 180 w/ autoset
    OCC Paul jr Elite helmet
    a couple Harleys, a dog and wife. In that order.

  • #2
    more pics of the construction

    I used 1/4-20 bolts about a 1/4 longer than the originals to fasten it to the top of my 250. I poked holes in the cover to get the bolts through and I can still protect by 250, I just roll it up when I use it. The aluminum plate is easy to remove also so I can get to my lift eye if needed. The pedal hook sure comes in handy!
    Attached Files
    Last edited by charleskmoore2; 12-10-2008, 03:40 PM.
    Syncrowave 250 DX w/cooler
    Spectrum 625
    Millermatic 180 w/ autoset
    OCC Paul jr Elite helmet
    a couple Harleys, a dog and wife. In that order.

    Comment


    • #3
      Innovative design, however I'd hate the thought of having to remove all that equipment (mig, plasma) every time I needed to use my tig. Or, are you suggesting that you use the tig with the cover in place? I would suspect that that may cause some cooling problems.

      I see you have the Tigrunner with the integrated cooler originally built into the power supply. Have you upgraded to the Coolmate 3 mounted under the power supply?

      A lot of good looking "BLUE" equipment there.
      Syncrowave 250 DX Tigrunner
      Dynasty 200 DX
      Miller XMT 304 w/714D Feeder & Optima Control
      Miller MM 251 w/Q300 & 30A SG
      Hobart HH187
      Dialarc 250 AC/DC
      Hypertherm PM 600 & 1250
      Wilton 7"x12" bandsaw
      PC Dry Cut Saw, Dewalt Chop Saw
      Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
      Thermco and Smith (2) Gas Mixers
      More grinders than hands

      Comment


      • #4
        Charlie,
        Looks slick, Its good to see someone taking care of their stuff. As much as I like my equipment it seems to stay covered in coffee cups with old coffee and a layer of grinder dust in them.
        Webb's Welding and Repair LLC
        MM210 w/a 3035 spoolgun
        Syncrowave 250
        Spectrum 625
        Trialbazer 302 w/HF
        http://webbsweldingandrepair.com/home

        Comment


        • #5
          Originally posted by Jetmekdc-10 View Post
          Charlie,
          Looks slick, Its good to see someone taking care of their stuff. As much as I like my equipment it seems to stay covered in coffee cups with old coffee and a layer of grinder dust in them.
          oh i know EXACTLY what your talking about...

          i have a bad habit of leaving the cup on my work while grinding,hammering,....they fall and i break em
          my daddy always said i was IRONHEADED....
          feel free to P/M me

          Comment


          • #6
            update

            I definately don't use the tig with the cover in place. It's permanely mounted so I just roll it up and stuff it under the mig rack. I've got the watercooled version, 250DX w/integrated cooler.
            Syncrowave 250 DX w/cooler
            Spectrum 625
            Millermatic 180 w/ autoset
            OCC Paul jr Elite helmet
            a couple Harleys, a dog and wife. In that order.

            Comment

            Working...
            X