Announcement

Collapse
No announcement yet.

Practice weld pic's

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Practice weld pic's

    Took some 1/8" sheet and cut some slices in it. Welded it back together with my MM180. Frontside and backside pic's.
    Attached Files
    Proud owner of a MM180!

  • #2
    Nice job and you didn't even burn the cardboard ...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      to me it looks a little cold, a bit more heat or adding a weave either a circle or c's back and forth would add some penetration.

      Also it will help you to do longer welds as the practice of making longer welds will give you more continuous bead length.

      The beads have a slight continuity variation in width.

      This is however good news, your pretty close just more time under the hood and more burning materials.

      Comment


      • #4
        Thanks guys.
        Proud owner of a MM180!

        Comment

        Working...
        X