Announcement

Collapse
No announcement yet.

Someone Can Help Me, Need Measurement

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Someone Can Help Me, Need Measurement

    Hi everybody

    I am looking for the distance between center to center of the holes in the block , i bought the scroll attachement but i want to do the block myself , they sell the block for 108,00$ at unibender , just imagine a piece of 2x3 and 3 sleeve of 3 inches , i can do that for cheaper i think .

    Sorry for the small pictures .

    THANK YOU

    Bobby
    Attached Files
    FABRICATION-CRÉATION K ZEN

    MILLERMATIC 210
    SPOOLMATE 3035
    SYNCROWAVE 200
    HYPERTHERM 360

  • #2
    I have it but mine is 20 miles from my house...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      if you have the Scroll attachment why don't you just measure It?
      Ed Conley
      http://www.screamingbroccoli.net/
      MM252
      MM211
      Passport Plus w/Spool Gun
      TA185
      Miller 125c Plasma 120v
      O/A set
      SO 2020 Bender
      You can call me Bacchus

      Comment


      • #4
        Do you have access to machinist calipers or ruler? If this measurement is in a straight line, measure the thickness of the wall between the holes and then add the diameter of one of the holes and you will have the distance from center to center. Or am I missing something here?

        David
        Last edited by dsgsr; 12-01-2008, 03:03 PM.

        Comment

        Working...
        X