Announcement

Collapse
No announcement yet.

Bead Roller, Modified HF

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bead Roller, Modified HF

    Bought a HF Bead Roller a few months ago, and finally got around to beefing it up.

    If you know anything about these, they are just about worthless in the 'stock' form...you have to consider it a bead roller kit.

    I used 3/8x2 flat stock, some scrap, and a 2" tube so I could fit it in my receiver.

    I did some test panels in 18 ga.

    Works fine. Now I need practice.

    -James
    Attached Files

  • #2
    Next is to add the dc motor and controller?

    Nice work

    Comment


    • #3
      Thanks,

      I'd like to motorize it but probably won't. Unless I get a bunch of beadrolling work, which I don't see happening.

      -James

      Comment


      • #4
        nice job, looks like it should do a great job now.
        thanks for the help
        ......or..........
        hope i helped
        sigpic
        feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
        summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
        JAMES

        Comment


        • #5
          Looks great...nice and beefy.
          Came across this while searching for other stuff.....check it out.

          http://www.jalopyjournal.com/forum/s...ghlight=roller

          Comment

          Working...
          X