Announcement

Collapse
No announcement yet.

Portable Welding Stand

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    MB2,

    Nice stand, it looks like two of side tubing pieces go to the inside of the stand when it's set up, is that what's "locking" it into place?
    sigpic

    Miller 140 w A/S
    HF 90 Amp Flux Core
    Dewalt Chop Saw
    Smith O/A Torch
    Ryobi, HF grinders

    Harley Electra Glide Classic

    Comment


    • #17
      Yes. It is a simple "X" bracing for the legs with a bolt where the "X" meets. I have one side of the "X" permenantly mounted to the table with bolts on the outside of the angle frame, the other side just swivels up to the inside of the angle iron frame of the top.

      As long as you aren't lifting up on the top, the table is pretty stable. When your done with the table, the legs swivel away from the top & it folds flat to store against the wall.

      If I needed to make it more stable, I could drill a hole in the angle & legs then run a pin through it so it doesn't fall. But for me, I don't need the pin.

      Comment

      Working...
      X