Announcement

Collapse
No announcement yet.

Stand for Acetylene/Air Torch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stand for Acetylene/Air Torch

    Attached are some pictures of a stand that I built for my daughters "B" size Acetylene tank that she uses with her Acetylene/Air torch for Jewelry making as part of her metal working class at Western Michigan University. I designed a place for the all of the stuff that she uses with the torch. I have also included two pictures of her silver soldering some silver earrings. In the first she is heating the earing to melt the flux. In the second she is using a titanium pick to transfer a drop of solder to the joint. Its been a great learning experience for me as well.
    Attached Files
    Last edited by Don52; 11-15-2008, 10:58 PM.
    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport
    Miller Spectrum 375 Plasma Torch

  • #2
    That's a nice bit of metal fab, looks well thought out. And I love aluminum, soft, easy to work with, and after you're done welding; you're done. No paint needed.

    Please get your Daughter to wear safety glasses. I have a scar just outside the iris on my left eye from a solder splash.
    RETIRED desk jockey.

    Hobby weldor with a little training.

    Craftsman O/A---Flat, Vert, Ovhd, Horz.

    Miller Syncrowave 250.
    sigpic

    Comment


    • #3
      Lucky she has a father that is into welding I thought she would be using a much smaller torch!! Wish they had classes like that in Hawaii
      Great job on the cart!!!!!!!!
      I'm not late...
      I'm just on Hawaiian Time

      Comment


      • #4
        Would'nt it be better to use a small victor O/A set?
        Great work on the stand.
        This is an automotive discussion forum that has some great infromation

        www.autobodytoolmart.com/shoptalk

        Comment


        • #5
          Don, very nice job on the stand, looks like your daughter really enjoys what she is doing. I agree with Craig though, see if you can get her to wear safety glasses, maybe even goggles, we only get one pair of eyes in life.



          Originally posted by Bert View Post
          Wish they had classes like that in Hawaii
          Say Bert, they do in Oahu and Honolulu. I think the instructor is even a Hula girl
          Last edited by KBar; 11-16-2008, 06:46 AM.
          Ken

          What else is there besides welding and riding. Besides that

          Miller Thunderbolt XL 300/200 AC/DC
          Hobart Handler 187
          Dewalt Chop Saw
          4" Air Grinder
          Die Grinder
          Rigid Drill Press
          Kellogg 10hp Air Compressor


          2009 FXDC

          Comment


          • #6
            Originally posted by metalmeltr View Post
            Would'nt it be better to use a small victor O/A set?
            Great work on the stand.
            You don't need the Oxy for Jewelry work.
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment


            • #7
              Thanks for all comments. I will remind my daughter to wear her safety glasses.
              Miller Thunderbolt
              Smith Oxyacetylene Torch
              Miller Dynasty 200DX
              Lincoln SP-250 MIG Welder
              Clausing/Coldchester 15" Lathe
              16" DuAll Saw
              15" Drill Press
              7" x 9" Swivel Head Horizontal Band Saw
              20 Ton Arbor Press
              Bridgeport
              Miller Spectrum 375 Plasma Torch

              Comment


              • #8
                Originally posted by Don52 View Post
                Thanks for all comments. I will remind my daughter to wear her safety glasses.
                They have plenty of Cool ones these days
                Ed Conley
                http://www.screamingbroccoli.net/
                MM252
                MM211
                Passport Plus w/Spool Gun
                TA185
                Miller 125c Plasma 120v
                O/A set
                SO 2020 Bender
                You can call me Bacchus

                Comment


                • #9
                  looks great. lot of work for a tank holder, i'm shore she is very happy to have it. now tell her to wear the glasses or you will take it back.
                  thanks for the help
                  ......or..........
                  hope i helped
                  sigpic
                  feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
                  summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
                  JAMES

                  Comment


                  • #10
                    That's one sweet looking tank holder! Are the arces where teh tip holder part is cut with a plasma or bandsaw?. I have to agree with everyone else about the glasses, so tell her "alot of people you know worry" maybe that'll help :P

                    I'm surprised that's such a large torch for jewelry. I thought it would be one of those micro victor sets i see at the LWS all the time. I think it's really cool to see women into welding, brazing, soldering etc... it's just not that common and it's very cool. I can imagine her being out on a date when something breaks on the car and she has the wrench from and the car just about finished by the time he finds the number for Tipple A (AAA) LOL LOL

                    Just curious does she do any other welding or metal working, like TIG, MIG etc..?

                    I remember when i first met my wife, I had been called to a buddy's house to double check a motor install before it was fired up and she was there helping. I remember saying to myself in a joking manner "she looks like brittney spears with a ratchet and some grease on her hands"...make up still intact and all
                    Dynasty 200DX
                    Hobart Handler 135
                    Smith MB55A-510 O/A setup
                    Lathe/Mill/Bandsaw
                    Hypertherm Powermax 45
                    Just about every other hand tool you can imagine

                    Comment


                    • #11
                      Are the arcs where the tip holder part is cut with a plasma or bandsaw?
                      I just used my sabre saw. I haven't purchased a band saw or plasma cutter (yet).

                      I'm surprised that's such a large torch for jewelry. I thought it would be one of those micro victor sets i see at the LWS all the time.
                      The Smith Silversmith Jewelry Torch is the same one that is used in her class with acetylene/air. She is using the smallest size 00 tip. The oxy-acetylene torches such as the Smith "little torch" are very popular but have a small hot flame. Her teacher says that they are actually harder to use.

                      Just curious does she do any other welding or metal working, like TIG, MIG etc..?
                      She hasn't got into Tig or Mig yet. Her two studio classes require a lot of time and keep her busy. Her other studio class is silk screening. Her last major project was a 3,000 piece stained glass window, which was 5' x 5' that she soldered, but that was done with a soldering iron, not a torch. Attached is a link to the finished work. It is actually a large flower.

                      I have to agree with everyone else about the glasses, so tell her "alot of people you know worry" maybe that'll help :P
                      She said that she would wear her safety glasses in the future. Thanks for all the concerns and personal stories.
                      Attached Files
                      Miller Thunderbolt
                      Smith Oxyacetylene Torch
                      Miller Dynasty 200DX
                      Lincoln SP-250 MIG Welder
                      Clausing/Coldchester 15" Lathe
                      16" DuAll Saw
                      15" Drill Press
                      7" x 9" Swivel Head Horizontal Band Saw
                      20 Ton Arbor Press
                      Bridgeport
                      Miller Spectrum 375 Plasma Torch

                      Comment


                      • #12
                        Nice stand. I like that you added a place for all the accessories. Makes it an all-in-one carrier -- unlike my Victor portable O/A tank kit.

                        Originally posted by Bert View Post
                        Wish they had classes like that in Hawaii
                        Try Linekona School or Art Academy or whatever they're called these days.

                        Comment


                        • #13
                          Nice job on the tank holder!
                          sigpic

                          Miller 140 w A/S
                          HF 90 Amp Flux Core
                          Dewalt Chop Saw
                          Smith O/A Torch
                          Ryobi, HF grinders

                          Harley Electra Glide Classic

                          Comment


                          • #14
                            That's a great looking stand!

                            On small torches: I got a Meco Midget last year and I'm really impressed with it. It's bigger than a Smith "little torch" but smaller than the jeweler's air/fuel torch. You don't really need the temp of O/A for most jewelry work, but it's become my go-to torch for small silver brazing projects and working with thin gauge materials. O/A lets you do some things that aren't possible with just air/fuel. (I don't endorse smoking - the pack of cigs under the torch is just for scale.)
                            Attached Files
                            2007 Miller Dynasty 200 DX
                            2005 Miller Passport 180

                            Comment


                            • #15
                              then why did you have pack cigs handy?
                              This is an automotive discussion forum that has some great infromation

                              www.autobodytoolmart.com/shoptalk

                              Comment

                              Working...
                              X