Announcement

Collapse
No announcement yet.

Hog Roaster info needed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hog Roaster info needed

    Hi All,
    I'm looking for any information,Detailed pictures ect.on building a Hog Roaster.I have a 250 gal.fuel oil tank.I'm looking into using charcoal not gas for the cooking fire.Thanks.
    Trailblazer 250G
    Bobcat 225
    Miller 150 STL
    Lincoln SA-200
    Miller XMT 304
    Lincoln Squarewave 355
    Lincoln 140C
    Lincoln 170T
    Miller S-22A feeder
    Miller 30A Spoolgun
    Miller XR-15
    Lincoln LN-25's
    Hypetherm 380
    Trailblazer 302
    Spectrum 875
    Just to mention a few

  • #2
    http://www.motherearthnews.com/Do-It...g-Roaster.aspx Try this link Welder 99 I had someone on here pass it to me while I was planning my Pig Roaster,,, some good basic info for the fuel tank style roasters Jim
    Welding in Crete
    Syncrowave 350 LX
    Millermatic 252
    Millermatic 180 w Spoolgun
    Miller Gold Seal 155
    Miller Elite welding helmet
    JD2 Tubing bender with Hydraulic conversion
    Evolution Raptor15" SteelDry Cut Saw
    Hypertherm Powermax 30
    Some really cool hammers BIG and small

    Comment


    • #3
      Here is a combo cooker, direct for the porker or indirect for briskets. Tis a 26"x5', std. wt., that the nephew and I built. Pics show it's maden voyage, since then several pigs and the like have been cooked on this baby. Enjoy.
      Good luck
      L*S
      Attached Files

      Comment


      • #4
        That pig dont look very happy.
        Who do you call when the lawmakers ignore the law?

        Miller AC/DC Thunderbolt 225
        Miller 180 w/Autoset
        Old cutting torch on LPG

        Comment


        • #5
          Originally posted by Leons2003 View Post
          Here is a combo cooker, direct for the porker or indirect for briskets. Tis a 26"x5', std. wt., that the nephew and I built. Pics show it's maden voyage, since then several pigs and the like have been cooked on this baby. Enjoy.
          Good luck
          L*S
          Leon,What did you use for a rotisserie motor?I've been back and forth looking for a slow speed ac motor and they seem a little over priced wherever I look. Jim
          Welding in Crete
          Syncrowave 350 LX
          Millermatic 252
          Millermatic 180 w Spoolgun
          Miller Gold Seal 155
          Miller Elite welding helmet
          JD2 Tubing bender with Hydraulic conversion
          Evolution Raptor15" SteelDry Cut Saw
          Hypertherm Powermax 30
          Some really cool hammers BIG and small

          Comment

          Working...
          X