Announcement

Collapse
No announcement yet.

Trailer Tongue Stand

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trailer Tongue Stand

    Greetings.

    This is my first attempt at this, so please be gentle.

    I am very new at TIGing & am constantly attempting to find new ways to learn.

    A friend at work asked me if I could build him a stand to elevate the front of his boat trailer.

    Of course I agreed. Below is the pic of the completed stand.

    I could have MIGed the entire thing & done it a lot quicker. Some of the welds are pretty good, with most being only average (or below). I had a great time doing it, & actually it turned out pretty decent.

    He will have to cut the center post to fit, since he didn't tell me how tall to make it.

    Jerry in Anchorage
    (PS The rain coming down was just a bit lumpy -- can't use the "S***" word, yet.)
    Attached Files

  • #2
    Is the S word Snow or Sleet?????Nice stand, looks quite useful, Thanks,Paul
    More Spark Today Pleasesigpic

    Comment


    • #3
      The "S" Word

      You just had to ask didn't you?

      This was taken only a couple of hours after the pic of the trailer stand.

      The leaves aren't even down yet. Those flakes are huge!

      Only 7 more months till spring.

      Jerry in Anchorage
      Attached Files

      Comment


      • #4
        Jerry

        Nice stand you made there, I like it. As far as the snow, send all the pics you want, just dont send any of the real thing down this way
        Ken

        What else is there besides welding and riding. Besides that

        Miller Thunderbolt XL 300/200 AC/DC
        Hobart Handler 187
        Dewalt Chop Saw
        4" Air Grinder
        Die Grinder
        Rigid Drill Press
        Kellogg 10hp Air Compressor


        2009 FXDC

        Comment


        • #5
          Nice Stand

          I like your stand.

          I can't quite tell from the pic, what are you running vertically?
          sigpic

          Miller 140 w A/S
          HF 90 Amp Flux Core
          Dewalt Chop Saw
          Smith O/A Torch
          Ryobi, HF grinders

          Harley Electra Glide Classic

          Comment


          • #6
            Stand Material

            The whole thing was made from leftovers.
            The short piece that the center vertical fits into is a chunk of one inch ID square tube with approx 1/8th walls. It is about 6 inches long.
            The center tube is one inch OD sqaure with 0.080 walls.
            I clamped the short piece in the mill/drill & ran a 3/8 drill repeatedly through it with the spacing (on the inner piece) at one inch on center. I figured that way, every hole would fit, & they did.

            My friend at work was thrilled with it.

            He is an A&P mechanic for the air charter company that I fly for in Anchorage.

            Jerry

            Comment


            • #7
              nfinch86-CANADIAN WELDOR :

              Originally posted by muskt View Post
              The whole thing was made from leftovers.
              The short piece that the center vertical fits into is a chunk of one inch ID square tube with approx 1/8th walls. It is about 6 inches long.
              The center tube is one inch OD sqaure with 0.080 walls.
              I clamped the short piece in the mill/drill & ran a 3/8 drill repeatedly through it with the spacing (on the inner piece) at one inch on center. I figured that way, every hole would fit, & they did.

              My friend at work was thrilled with it.

              He is an A&P mechanic for the air charter company that I fly for in Anchorage.

              Jerry
              HI JERRY; LEFTOVERS or NOT ;Great Job looks like you know what you are doing; Enjoy!!!.... Norm :
              - Arcair- K 4000 CAC.
              - LN - 25
              - Lincoln Ranger 8
              -DeWalt Compressor

              www.normsmobilewelding.blogspot.com

              Comment

              Working...
              X