Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

Security panels for under deck storage

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Security panels for under deck storage

    My latest project still in progress. 1" square tubing frame, 1/2" square tubing rails, and sheet metal for the stars is all 16 gauge, the rings are 1/4" round bar. There are 10 of the panels with stars and there will be 4 different panels in the "wedge shaped" areas. I hope to start hanging the panels tomorrow so they will be level and the rails will line up from panel to panel (maybe?)...... I cut the stars using a pattern with my plasma cutter and rolled the rings on a HF ring roller (thus the 1/4" round bar).

    Name:  a07b3dc9d9c05b036bc5005a84b8190c.jpg
Views: 1
Size:  117.9 KB

    Name:  f5c87da76e250c26011d46fc41f4e3a4.jpg
Views: 1
Size:  88.7 KB

    Name:  d75aa8ee168ad3b6c238863be2909d74.jpg
Views: 1
Size:  32.3 KB

  • #2
    Good idea and nice work - looks good


    Special Offers: See the latest Miller deals and promotions.