Announcement

Collapse
No announcement yet.

U Joint Press/test

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • U Joint Press/test

    Here is a press i made the other day.
    And it's a photo test as well.


    The press stands 20" tall nice and small.
    ________
    Redhead Cams
    Last edited by Rubiconmike; 04-07-2011, 05:20 AM.
    Millermatic 135
    Dynasty 200DX

  • #2
    that looks pretty nice. Definitely a stout piece.

    Any reason why you didn't build it with more adjustments? it looks like it will work well for a specific use, but anything else would be difficult. Maybe you already have a general shop press, idunno.
    Millermatic 180 Auto Set

    Comment


    • #3
      I have six U Joints on my jeep.
      It has lockers front and back which can put
      a lot of stress on the drive train.
      So i will be useing the press alot.
      it's only 20" tall so easy to store.
      the cross bar comes out easy and can be
      changed for any small project that is needed.
      I do have the use of a larger 12 ton one as well.
      ________
      Suzuki katana history
      Last edited by Rubiconmike; 04-07-2011, 05:20 AM.
      Millermatic 135
      Dynasty 200DX

      Comment


      • #4
        Nice clean work. Looks great for your application.

        James
        Miller Dynasty 200DX SOLD
        WeldTec Water Cooler SOLD
        Miller Millermatic 180 w/ Spoolmate 100
        20Ton press
        And lots of Cut-off and grinding wheels
        www.IAGPERFORMANCE.com

        Comment

        Working...
        X