Announcement

Collapse
No announcement yet.

tig

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • tig

    Hi, I`ve got a question. I have a Miller thunderbolt AC/DC. Can I tig with it and what do I need to do it? Torch,Gas???? And does it work? I would like to learn to tig then maybe buy a dedicated machine if I see that I will use it. Also what torch would be good for this application thanks.

  • #2
    Does the thunderbolt have DC-?

    You need argon, a dry rig and a few other things. Run your argon to your dry rig, connect your dry rig to your thunderbolt. Set your machine to DC- and turn the amps down a bit. I know this is rough but it gives you a general idea.
    Measure twice, cut once.

    Comment


    • #3
      Yes it can be done, but it is rough. I did it with mine. Your torch will need a gas valve. All you need is the torch, argon and the Tbolt. Scratch start is all you have and DC only unless you rig in a Hi Freq unit somehow. It will let you get a little practice, though.....although you would learn more with a real TIG unit. I was learning more with my TB than the Tbolt. Well, I did almost perfect tungsten prep with the Tbolt. You learn how to contaminate them very well with the Tbolt.
      Don


      '06 Trailblazer 302
      '06 12RC feeder
      Super S-32P feeder

      HH210 & DP3035 spool gun
      Esab Multimaster 260
      Esab Heliarc 252 AC/DC

      Comment


      • #4
        That does sound pretty rough.
        Measure twice, cut once.

        Comment


        • #5
          THanks guys, I maybe better to wait, me wants an engine drive anyways. I would be money ahead.

          Comment

          Working...
          X