Announcement

Collapse
No announcement yet.

A little help with my thunderbolt...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • A little help with my thunderbolt...

    Hello,

    This may be an easy questuon from someone who has a acdc thunderbolt.

    I pulled my leads out to put longer ones in and didnt pay attention to where the ground goes and where the hot goes inside on the acdc switch. Can someone look for me and tell me the number? (there is a number next to each post on the acdc switch inside.)

    Thanks!

    Art
    Seattle, WA.
    (and yes i am stupid)

  • #2
    Art

    If you go to the service tab at the top of miller's website and click on it, you can get an owners manual downloaded. Should have a schematic for where your wires attach.
    Syncrowave 250 DX Tigrunner
    Dynasty 200 DX
    Miller XMT 304 w/714D Feeder & Optima Control
    Miller MM 251 w/Q300 & 30A SG
    Hobart HH187
    Dialarc 250 AC/DC
    Hypertherm PM 600 & 1250
    Wilton 7"x12" bandsaw
    PC Dry Cut Saw, Dewalt Chop Saw
    Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
    Thermco and Smith (2) Gas Mixers
    More grinders than hands

    Comment

    Working...
    X