Announcement

Collapse
No announcement yet.

What size spool for 180 mig

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • What size spool for 180 mig

    What is the max size wire spool for the Miller 180 welder. I think it's 8". If so, what is the weight of the full spool. My Miller 150 will take 44lb spools and I like that.
    Nick
    Miller 252 Mig
    Miller Cricket XL
    Millermatic 150 Mig
    Miller Syncrowave 200 Tig
    2-O/A outfits
    Jet Lathe and Mill
    Jet 7x12 horz/vert band saw
    DeWalt Multi Cutter metal saw
    Century 50 Amp Plasma Cutter
    20 ton electric/hydraulic vertical press
    Propane Forge
    60" X 60" router/plasma table

    www.youtube.com/watch?v=jTu7wicVCmQ
    Vist my site: www.nixstuff.com
    and check out some of my ironwork and other stuff

  • #2
    in .023 solid wire an 8" spool is 11 lbs. i suspect that will verry with flux core or even wire size, but 11 lbs is a place to start..
    thanks for the help
    ......or..........
    hope i helped
    sigpic
    feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
    summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
    JAMES

    Comment


    • #3
      My welder will take the bigger 44# spools but i don't use them because sometime's i just tack weld, 5,000 or 6,000 of them and i don't want to wear out the drive sooner so i use the smaller spools. The bigger one are cheaper though....Bob
      Bob Wright

      Spool Gun conversion. How To Do It. Below.
      http://www.millerwelds.com/resources...php?albumid=48

      Comment


      • #4
        11 # is the most I have seen on 8" spool

        Some of the fiber spools may look a bit bigger, but most only have 10# of wire on them. Of course the fiber spools weigh about 2 # empty.
        Last edited by deafman; 05-28-2008, 06:44 PM. Reason: clarity

        Comment


        • #5
          Economy.

          The large rolls are quite economical unless they are left in an area where they may rust. If they get any rust at all on them, they are scrap. That's why I prefer the 2# and 10# rolls on my SP 175 plus Lincoln. It won't take anything larger than the 10# anyway.
          Last edited by Synchroman; 05-31-2008, 06:07 AM.
          Miller Syncrowave 200
          Milermatic 252
          Lincoln AC/DC "Tombstone"

          Comment


          • #6
            I have a Passport Plus and I think it uses the same size spool as the 180. Mine uses a 8" 10 lb. 0.030 mild steel spool.
            Miller Maxstar 150 STL
            Miller Millermatic Passport Plus
            Thermal Dynamics Dragun Plasma Cutter

            Protect your seccond ammendment rights! Join the NRA!

            Comment

            Working...
            X