Announcement

Collapse
No announcement yet.

Old Miller welder?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest started a topic Old Miller welder?

    Old Miller welder?

    I 've been looking around the site alot latley learning alot from others post and, desided to join.

    First off I have a question I'm looking at this older Miller welder on a local classifieds site and, I have nowIdea what it is nether dose the owner. I was just wondering if anyone hear could help out. I know it's a Miller arc from the pic's but what I don't know is if it's just AC or AC/DC. Also is this welder any good. He's asking $100 for it. Any help would be great thanks.
    Attached Files

  • Anti-GMAW
    replied
    I'm 5'8", 140#. He's 6'4" and 180#+. I dont think so. Now that would be stupider than what he did. Besides as others have stated so clearly I should have made some atempt to lock it out so it is partly my fault. But I'm still pissed at him!

    Leave a comment:


  • fun4now
    replied
    I'd punch them out, just for being that stupid.
    yep, thats what i ment.

    Leave a comment:


  • JonnyTIG
    replied
    Getting zapped by welding current is one thing. (Reletively low voltage, high amperage). Getting zapped by recepticle power is a killer. ( high voltage, reletively low amps) Not something to toy around with. As for fighting words, if somebody plugged a machine in I was working on internaly, I'd punch them out, just for being that stupid.

    Leave a comment:


  • fun4now
    replied
    thems fighting words.
    you would think an adult in a repair shop would know better.
    i supose he thought it would be or was funny right.

    Leave a comment:


  • JonnyTIG
    replied
    Phila, you're absolutely right. Lock it out, tag it out, or wrap a whole roll of duct tape around the plug. What ever it takes to keep the equipment from being energized.

    Leave a comment:


  • phila.renewal
    replied
    Originally posted by Anti-GMAW View Post
    I was cleaning one out once and replacing the terminals with cam lock conectors when some dumbazz decided to plug it in!
    I'm sure you exercised discretion but there's no jury on earth that would have convicted you if you did what that guy deserved.

    Good reminder for everybody though -- lockout/tagout. Most guys I've worked with are careful of others but there's always at least one on site without a clue. Ah crap, I guess I've done my share of stupid things. OK, forgive and forget.

    Leave a comment:


  • Anti-GMAW
    replied
    He!! of a good deal! Old miller thunderbolt straight AC hi/low and work plugs. I got shocked working on one of those before. I was cleaning one out once and replacing the terminals with cam lock conectors when some dumbazz decided to plug it in! (you know who you are if you ever read this.) My arm was limp for 2 days before I regained fealing in it. It was wired for 220 so I was prety lucky thats all I ended up with.

    Leave a comment:


  • Fat-Fab.com
    replied
    Miller Thunderbolt my first welder ac only work and hi low $100.00 smoking deal.


    You cant brake it

    Tj

    Leave a comment:


  • FusionKing
    replied
    I have one just like that I bought around 1980 new and I still wouldn't take a hundred bucks for it even tho I never use it. Should be a good deal.

    Leave a comment:


  • DDA52
    replied
    Definitely straight AC. It will have a work plug and an AC high and AC low output plug.

    Leave a comment:


  • fun4now
    replied
    welcome
    any chance of better pic's or ask him to read the plate on the back, he should be able to find out if its ac or ac/dcthe lil stick boxes are about indistructable so if it sparks it bound to be fine.

    Leave a comment:


  • JonnyTIG
    replied
    Looks like a Miller Thunderbolt 225 -250 amp AC machine. A machine with AC and DC capabillites would probably have more lead terminals. I used to own the ac/dc version, it was a good stick machine for all around uses. $100 isn't a bad price if it comes with the leads. The newer version of that machine costs $389 right here on the Miller site.

    Leave a comment:


  • weld_13
    replied
    to me it looks like it might be ac/dc cause of the three lead hookups at the bottom but im not shure. do u have any other pictures? it could also be an inverter cause of the hookups to i think.

    Leave a comment:

Working...
X