Announcement

Collapse
No announcement yet.

Aluminum Brazing

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lanceman73
    started a topic Aluminum Brazing

    Aluminum Brazing

    Is anyone doing any aluminum brazing? I've got a killer brazing rod that will do just about anything. One rod is 900 degrees melting and 1100 degrees melting for the other. Flux cored and awesome!

  • arthur
    replied
    http://img205.imageshack.us/my.php?image=0014iq5.jpg
    http://img205.imageshack.us/my.php?image=0011lc1.jpg
    http://img224.imageshack.us/my.php?image=0015ch3.jpg
    http://img205.imageshack.us/my.php?image=0016jl1.jpg

    Leave a comment:


  • arthur
    replied
    http://img233.imageshack.us/my.php?image=a42bt7.jpg
    http://img512.imageshack.us/my.php?image=a45dx1.jpg
    http://img160.imageshack.us/my.php?image=a46oj8.jpg

    aluminum brazing for AC

    Leave a comment:


  • tasslehawf
    replied
    I have dealt with Oceanside for the last 4 years and have a never had a bad experience. I bought my 180SD there. Good people!

    Leave a comment:


  • kcstott
    replied
    Yeah I was wondering because they were the weld supplier for a few shops I worked for. I think the customer service deal is hiring idiots. it happens everywhere. Good to see the family still owns it though.
    Kerry

    Leave a comment:


  • lanceman73
    replied
    Westair/SD Welders Supply

    It's the same company. They changed names when they went out of state. The owner, Andy Castiglione, sort of retired. His son, Steve, is running the show. Sorry about your bad experience. I might get a different service, since I have a family account. I usually deal with the El Cajon branch. I'll let them know about your problem.

    Thanks,
    Lance Castiglione

    Leave a comment:


  • kcstott
    replied
    Lanceman
    Your relatives wouldn't happen to be the old San diego welders supply would they?? They were my supplier of choice, Sorry to say that the Oceanside office and Escondido office had poor customer service after Westair took over. Haven't been back in five years so I hope things have changed.
    Kerry

    Leave a comment:


  • Broccoli1
    replied
    Originally posted by ShieldArc View Post
    In that case tell me more. I have a use for that brazing once in awhile.
    http://www.docsblocks.com/products.asp?cat=16

    Leave a comment:


  • k zen
    replied
    HI EVERYONE

    JUSTE TO GIVE YOU A LINK ABOUT BRAZING

    www.muggyweld.com

    Bobby

    Leave a comment:


  • ShieldArc
    replied
    In that case tell me more. I have a use for that brazing once in awhile.

    Leave a comment:


  • lanceman73
    replied
    aluminum brazing rod

    I use it for brazing condensers, evaporators, and for making hard lines for a/c system. I'm not selling it. I looked for a long time before I found anything that was any good. My relatives own Westair, which is a welding supply house in San Diego and Yuma. They don't carry it. It is flux cored and the aluminum doesn't have to be spotless. The company that sells it is in Arkansas, I think. It is called Doc's Blocks. That is also the name of the website. I did buy the torch that they sell, but it is for propane and I just use my O/A setup on my service truck.

    Leave a comment:


  • J hall
    replied
    He must be selling it.

    Leave a comment:


  • ShieldArc
    replied
    What are you brazing with it?

    Leave a comment:

Working...
X