Announcement

Collapse
No announcement yet.

Sterling engine

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sterling engine

    Hey Guys, (& Gals)

    Anybody built a sterling engine before? Do you know where I can get some decent plans for something that isnt built from pop cans coat hangers, and old combs- and that is as close to free as possible?

    I saw a vid on youtube where a guy is BURNING salt water by using radio waves. the heat it somewhere close to 1500 degrees this poses some interesting possiblities....

    http://youtube.com/watch?v=Tf4gOS8aoFk
    Will it weld? I loooove electricity!

    Miller 251/30A spool
    Syncro200
    Spectrum 625
    O/A
    Precix 5x10 CNC Router12"Z
    Standard modern lathe
    Cheap Chinese mill that does the trick... sort of...
    horizontal 7x12 bandsaw
    Roland XC540 PRO III
    54" laminator
    hammer and screwdriver (most used)
    little dog
    pooper scooper (2nd most used...)

  • #2
    I have some good plans for an easy one i can send you. I just went to N.A.M.E.S a few weeks ago and saw hundreds of them...Bob

    http://www.modelengineeringsoc.com/
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      Hi Bob,
      I kinda figured you'd have something. I'd appreciate anything. I'll pm you.

      Thanks Rich.
      Will it weld? I loooove electricity!

      Miller 251/30A spool
      Syncro200
      Spectrum 625
      O/A
      Precix 5x10 CNC Router12"Z
      Standard modern lathe
      Cheap Chinese mill that does the trick... sort of...
      horizontal 7x12 bandsaw
      Roland XC540 PRO III
      54" laminator
      hammer and screwdriver (most used)
      little dog
      pooper scooper (2nd most used...)

      Comment


      • #4
        Here is the same engine made from a Pratical Machinist member. Its pretty simple...Bob
        Attached Files
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          exactly!

          Now thats what im talkin' about! thats one fine looking machine Bob.
          Will it weld? I loooove electricity!

          Miller 251/30A spool
          Syncro200
          Spectrum 625
          O/A
          Precix 5x10 CNC Router12"Z
          Standard modern lathe
          Cheap Chinese mill that does the trick... sort of...
          horizontal 7x12 bandsaw
          Roland XC540 PRO III
          54" laminator
          hammer and screwdriver (most used)
          little dog
          pooper scooper (2nd most used...)

          Comment

          Working...
          X