Announcement

Collapse
No announcement yet.

Hybrid Workbench

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hybrid Workbench

    To me, blending woodworking and metalworking allows a better project. I used my Miller Thunderbolt AC/DC to weld a 10' by 30" metal framework of 3X3 tubing with 1/4" wall thickness. Added support framework for storage shelving is welded between the wheelbase using 2X2 angle iron 1/4" thick. With a metal framework, the span below the workbench tops is extremely open and allows much more unobstructed storage. 1-1/8" oak is attached to the metal framework with countersunk and plugged self-tapping screws. In the second photo, you can see the spacing of the doors and wood framework stiles. To help seal the lower storage area from dust or spills, plywood is screwed to 1/2X1/2" angle iron which was caulked and painted with an oil base paint (yellow surfaces).

    Also, below the center folding doors is a long thin shelf made of 2X2 by 1/4" thick angle iron. It supports thick Masonite covers I use for the workbench Maple, Oak, and Walnut 2" thick tops when I'm working on heavy or greasy metal projects. When finished, they simply slide under and out of the way.

    The "T-Shaped" length of 8ft. by 38" wide with the top of the "T" being 6'-6" by 36" wide. A 6'-6" tool tray is 12" wide and 5" deep. Total length of the mobile workbench is 12' and is on 6" casters that have brakes. Total cost of the finished workbench, including all the two "Twin Screw" wood-jaw vise-kits, was $850.00.


    Question: After seeing so many hits on this post, I'm asking for MORE of you to let me know what you think of the "T-Shape" design, too.

    Bill
    Attached Files
    Last edited by BilljustBill; 02-25-2006, 02:46 PM. Reason: Question

  • #2
    That's a beautiful work bench, Bill it'd be a shame to get it dirty! Truley a work of art! Thanks for sharing.
    Arcin' and Sparkin', Rocky D

    "Experience is the name we give our mistakes"

    Comment


    • #3
      That's very nice, Bill. I wish I was better at woodworking!

      Mow

      Comment


      • #4
        I had just about quit woodworking when I started welding, guess I should look at doing both. All I need is the time, great project, and useful too.
        Regards, George

        Hobart Handler 210 w/DP3035 - Great 240V small Mig
        Hobart Handler 140 - Great 120V Mig
        Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

        Miller Dynasty 200DX with cooler of my design, works for me
        Miller Spectrum 375 - Nice Cutter

        Comment


        • #5
          Good lookin' stuff, dude! Excellent combo of two great arts!

          Comment


          • #6
            Very nice, almost too nice. Wouldn't want to be the guy who puts the first scratch in the top.
            When in doubt Weld It

            Comment


            • #7
              Absolutely beautiful. I only wish I had woodworking skills like that. Its almost a shame to know that it is going to be used for metal working too. I wouldn't have the heart to scratch it.

              Comment


              • #8
                Nice Nice Nice

                My Friend that is to nice to be used in a shop. I would have had to build a cover over it or stored it in my house. Keep up the nice work!!
                You can fix anything from a "Broken Heart to the Crack of Dawn" if you have the right tool's

                Comment


                • #9
                  Substaintial unit and I agree it would better fit in my house than in the shop. Great job,
                  Laurence
                  Laurence
                  TO MUCH BLUE TO LIST

                  Comment


                  • #10
                    If I had a table that nice I would be afreid to work on it. Wouldn't want to get it dirty.
                    To all who contribute to this board.
                    My sincere thanks , Pete.

                    Pureox OA
                    Westinghouse 300 amp AC stick
                    Miller Syncrowave 250
                    Hexacon 250 watt solder iron

                    Comment


                    • #11
                      Great looking bench, I love the combination of wood and metal. How many hours you got into it?

                      Comment


                      • #12
                        This may be a Hybrid Workbench in your eyes.... but I call it a work of ART !! I commend you on your talent, skill and desire to achieve excellence. Totally above board and I thank you for sharing ot with us. Is there a set of plans to this masterpiece that you would like to share?
                        Best Regard,
                        __________________
                        Jesse
                        aka Neo

                        Miller Passport
                        Miller 225G
                        Red 255
                        VIctor O/A
                        Wish list:
                        Maxstar 150STH or
                        Syncrowave 250DX
                        A Dynasty 300 if I am wishing really hard..

                        Comment


                        • #13
                          No Current Plans

                          Thanks for the nice words. Currently I don't have any plans for the "T-Shape" design, but might have an article submitted to "Fine Woodworking" magazine before the year is out.

                          Bill

                          Comment


                          • #14
                            weld

                            Originally posted by BilljustBill
                            Thanks for the nice words.
                            Bill
                            Bill, Will you use this as a welding table too?
                            *LOL*
                            Great job!
                            Farris
                            Gone But Never Forgotten!

                            Comment


                            • #15
                              Wow that looks real nice.
                              Joe
                              Tecumseh, MI

                              Comment

                              Working...
                              X