Announcement

Collapse
No announcement yet.

Dumpbody patches

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dumpbody patches

    These are some pics in front of my shop.I welded 2 patches 3/16 thick 30"x72" each pc.I did this job today for one of my customers.The last pic is looking out of the dump at my mm250x and my helmet on the floor.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    Very nice work!

    Comment


    • #3
      You tack-welded the door open. Lol.
      Miller Maxstar 200 DX
      RMLS-14 Momentary Hand Control
      Miller Syncrowave 180 SD
      Porter Cable 14" dry metal saw
      Hitachi 4.5" grinder
      http://mhayesdesign.com

      Comment


      • #4
        Originally posted by tasslehawf View Post
        You tack-welded the door open. Lol.
        I tacked a angle iron in there to hold the gate open yes.Why?You would have trusted just the pc of wood i had wedged up at the top to hold that 500lb gate open with you in between it. .LOL
        BB402D
        TB300D
        DIMENSION652
        MM250X
        MAXSTAR140
        S-32 FEEDER W/1260 IRONMATE FC/GUN
        HT/PWR-MAX1250 PLASMA

        Comment


        • #5
          Originally posted by admweld View Post
          I tacked a angle iron in there to hold the gate open yes.Why?You would have trusted just the pc of wood i had wedged up at the top to hold that 500lb gate open with you in between it. .LOL
          I would have done the same. and my wife would have rolled her eyes at me.
          Miller Maxstar 200 DX
          RMLS-14 Momentary Hand Control
          Miller Syncrowave 180 SD
          Porter Cable 14" dry metal saw
          Hitachi 4.5" grinder
          http://mhayesdesign.com

          Comment

          Working...
          X