Announcement

Collapse
No announcement yet.

Al. rectangular tubing caps

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Al. rectangular tubing caps

    I have a client looking to do a patio cover with 2" x 6" al. rectangular tubing and I'm looking to see if aluminum push-in caps for the end exist? I've been googling away but haven't found anything yet-any ideas of who I can contact? Thx, cat

  • #2
    cat
    I looked in kingmetals,but has only up to 3'' x 1".
    2- XMT's 350 cc/cv
    1- Blue star 185
    1- BOBCAT 250
    1- TRAILBLAZER 302
    1- MILLER DVI
    1- PASSPORT PLUS
    1- DYNASTY 200 DX
    1- MAXSTAR 150 STL
    1- HF-251 BOX
    1- S-74d
    1- S-75DXA
    2- 12-RC SUITCASES
    1- 8-VS SUITCASE
    2- 30 A SPOOLGUNS

    Comment


    • #3
      try here http://www.carlisleplastics.com/products/rfq/rqflat.htm
      2- XMT's 350 cc/cv
      1- Blue star 185
      1- BOBCAT 250
      1- TRAILBLAZER 302
      1- MILLER DVI
      1- PASSPORT PLUS
      1- DYNASTY 200 DX
      1- MAXSTAR 150 STL
      1- HF-251 BOX
      1- S-74d
      1- S-75DXA
      2- 12-RC SUITCASES
      1- 8-VS SUITCASE
      2- 30 A SPOOLGUNS

      Comment


      • #4
        You could twang out your own from 1/8" alum plate then make a little die to push the center up a little making it a little fancy then weld it on or put some tabs on the inside and screw it on the post...Bob
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          Have you tried Eastern Metals?

          I get almost all of my aluminum products from them. Dave

          www.easternmetal.com
          If necessity is the Mother of Invention, I must be the Father of Desperation!

          sigpicJohn Blewett III 10-22-73 to 8-16-07
          Another racing great gone but not to be forgotten.http://video.google.com/videoplay?do...modified&hl=en

          Comment


          • #6
            Thx for all the hints-I did look at King since I use them all the time; I'm trying to find aluminum for the ends that show but I will need plastic for the ends that butt to the house; I don't want to have to weld the end caps cuz there will be lots of them; and I did send an email to Easternmetals asking for more info from them. Thx again and if anyone thinks of anything else, please let me know. cat
            p.s. I think I forgot to mention that these are all the slats that span the ledgers/beams. c

            Comment

            Working...
            X