Announcement

Collapse
No announcement yet.

About the pigmy goat

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • About the pigmy goat

    These darn things are a riot! If they weren't so flaming funny I would have had a BBQ a long time ago. My wife drug them home one day about a year ago and they are just like the family dogs! The only difference is they never stop screwing around, climbing on top of everything and of course those funny little horns. They keep me laughing all the time. They sleep in trees, on top of my truck roof, the house roof, the mailbox, the trash cans and you never ever know where you might find them next

    TacMig
    Attached Files
    We depend On:
    Miller | Esab | Lincoln | Fronius
    Baileigh | Drake | Eagle | Knuth
    Victor | Harris | Smith | Bessey
    Snap-On | Hilti | Ingersoll Rand
    Burco/Koco | Onan | BobCat
    Tracker | Infratrol | AmeriCast

    We belong to or support:
    American National Standards Institute
    American Welding Society
    The Welding Institute
    Fabricators & Manufacturing Association Int'l.

    Anderson & Co. LLC
    Metal Cr
    afters

  • #2
    They don't dent up the hood of your car/truck?
    I'm not late...
    I'm just on Hawaiian Time

    Comment


    • #3
      Oh ya...

      Originally posted by Bert View Post
      They don't dent up the hood of your car/truck?
      Like I said "if they weren't so hilarious, I would have had a BBQ by now". We keep whatever we don't want eaten, dented, slept in/on, climbed on, pooped on or otherwise damaged put away. The thing is, they know they are not supposed to be causing mischief and mayhem but they just like to get my goat! They do something to completely piss me off, then they haul and do something funny like scratch themselves and fall down. I'm serious, every time the male scratches himself he falls down square on his back and it's even funnier watching him get up. It's like watching a 500 pound drunken sailor picking himself up off the bar floor. How can anyone stay mad when your laughing so hard you fall down yourself?

      TacMig
      We depend On:
      Miller | Esab | Lincoln | Fronius
      Baileigh | Drake | Eagle | Knuth
      Victor | Harris | Smith | Bessey
      Snap-On | Hilti | Ingersoll Rand
      Burco/Koco | Onan | BobCat
      Tracker | Infratrol | AmeriCast

      We belong to or support:
      American National Standards Institute
      American Welding Society
      The Welding Institute
      Fabricators & Manufacturing Association Int'l.

      Anderson & Co. LLC
      Metal Cr
      afters

      Comment


      • #4
        Good Reason I'm a animal lover freak myself
        Ok, well...I shoot a lot of fish though....
        I'm not late...
        I'm just on Hawaiian Time

        Comment


        • #5
          I've always thought a pet goat would be really cool, fascinating animals and loyal too.
          Dynasty 200DX, first generation
          Makita 5" grinder
          Makita 14" abrasive saw
          IR SS5L compressor
          Whole bunch of hand/air tools.
          and a wish list a mile long

          Comment


          • #6
            That's awesome. Goats are cool animals.

            Comment


            • #7
              Mine got in the garage, drug out a box of outdoor Christmas lights and ate the bulbs like candy. Little SOBs loved flowers, trying to get in the house, stuck under tractor, truck or anything imaginiable.

              Loved to lick the bar oil from the chainsaws.
              Best part was \, they loved poisonevy and briers.
              Tons of fun tho.


              Finally gave them to a girl for 4H,

              the one with the horns butted EVERYTHING non stop. from 3am to 2am ha ha.
              Tim Beeker,
              T-N-J Industries
              (my side bussiness)

              Miller Synchrowave 350LX with tigrunner
              Esab 450i with wire feeder
              HH135 mig
              Thermal Dynamics cutmaster 51 plasma cutter
              Miller aircrafter 330 - sold
              Marathon 315mm coldsaw
              vertical and horizontal band saws
              table saw
              Dewalt cut off saw
              Sand blast cabinet
              lots of hand grinders
              Harris torch
              beer fridge

              Comment


              • #8
                In 1972 my dad flew some over from South Africa somplace and we started breeding and selling them. High dollar at first like 300 bucks for females and 100 for males. Even Larry Zonka bought a few from us when he still was a star. But after about 10 years the market started getting full of them and my dad finally retired and i had a few at my place. I used to ride around around with a few small ones in the truck and the kids in town loved them. I even went around and picked up all the christmas trees in town and the goats loved them. They would eat them down to the toothpick in the middle with nothing left, they would even eat the tinsle. In the winter he used to get some from Ogelby Park in WVa and use them to breed because they only wanted young pettable ones there and didn't want to feed a herd of them. We were always taking them to the Pittsburg airport to ship someplace. Fun in its day, except for bailing hay when its 100 degrees out...Bob
                Bob Wright

                Spool Gun conversion. How To Do It. Below.
                http://www.millerwelds.com/resources...php?albumid=48

                Comment


                • #9
                  Man that's hilarious My Grandfather had a bunch of them when I was a kid they will definitely eat anything, climb on top of the house even, and all sorts of general mischief but they're funny as ****

                  Comment


                  • #10
                    Fainting goats

                    Well I will have to agree, they are great little animals. I have 4 fainting goats (3 does and 1 buck) and a boer doe. I must say the funniest thing I ever saw was watching them go down the slide of a childs swing set. Not one of those metal ones, but the large castle / playhouse types from wood. It was one of the most hilarious things to see. they kept going back and forth like little kids at the playground running to get back on the slide. the only down side is that I still haven't been able to get them on tape. they have done this twice already and every time... either out of batteries or my hands were full.....

                    Comment


                    • #11
                      pigmy goats have small butts
                      Nick
                      Miller 252 Mig
                      Miller Cricket XL
                      Millermatic 150 Mig
                      Miller Syncrowave 200 Tig
                      2-O/A outfits
                      Jet Lathe and Mill
                      Jet 7x12 horz/vert band saw
                      DeWalt Multi Cutter metal saw
                      Century 50 Amp Plasma Cutter
                      20 ton electric/hydraulic vertical press
                      Propane Forge
                      60" X 60" router/plasma table

                      www.youtube.com/watch?v=jTu7wicVCmQ
                      Vist my site: www.nixstuff.com
                      and check out some of my ironwork and other stuff

                      Comment


                      • #12
                        Originally posted by monte55 View Post
                        pigmy goats have small butts
                        I'm not really sure most of us would want to know how you know this tidbit of information
                        If necessity is the Mother of Invention, I must be the Father of Desperation!

                        sigpicJohn Blewett III 10-22-73 to 8-16-07
                        Another racing great gone but not to be forgotten.http://video.google.com/videoplay?do...modified&hl=en

                        Comment


                        • #13
                          Large goats can butt pretty hard.......very small goats can't butt very hard..ie..small butts..
                          What were you thinking?
                          Nick
                          Miller 252 Mig
                          Miller Cricket XL
                          Millermatic 150 Mig
                          Miller Syncrowave 200 Tig
                          2-O/A outfits
                          Jet Lathe and Mill
                          Jet 7x12 horz/vert band saw
                          DeWalt Multi Cutter metal saw
                          Century 50 Amp Plasma Cutter
                          20 ton electric/hydraulic vertical press
                          Propane Forge
                          60" X 60" router/plasma table

                          www.youtube.com/watch?v=jTu7wicVCmQ
                          Vist my site: www.nixstuff.com
                          and check out some of my ironwork and other stuff

                          Comment


                          • #14
                            roflmao!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
                            I'm not late...
                            I'm just on Hawaiian Time

                            Comment


                            • #15
                              Little butts?

                              I don't know about that one? My male just about K.O'd the neighbors cat.. more pixs....

                              TacMig
                              Attached Files
                              We depend On:
                              Miller | Esab | Lincoln | Fronius
                              Baileigh | Drake | Eagle | Knuth
                              Victor | Harris | Smith | Bessey
                              Snap-On | Hilti | Ingersoll Rand
                              Burco/Koco | Onan | BobCat
                              Tracker | Infratrol | AmeriCast

                              We belong to or support:
                              American National Standards Institute
                              American Welding Society
                              The Welding Institute
                              Fabricators & Manufacturing Association Int'l.

                              Anderson & Co. LLC
                              Metal Cr
                              afters

                              Comment

                              Working...
                              X