Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.


Announcement Module
No announcement yet.

My Jeep Project

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • My Jeep Project

    I finally got it on the road! A customer of mine had brought it to the dealer for the brakes. The dealer looked at it and found the track bar bracket on the rear end was rotted out and said it cound not be fixed and they could not let it go due to saftey concerns. He bought a newer one and GAVE it to the dealer. I found this out when he was showing me his new jeep and telling me they were going to junk it when he gave them the title. I said WAIT! I want it! It took me about 3 months of sleepless nights to get the title and finally get it from the dealer. Here is my FREE 91 wrangler.

    The brake problem was 1 back set of pads were a little screwey and a leaky master cylinder cap. It finally ran out of fluid and he lost most of his braking and freaked. That seems to be the only problem I found.

    I took a 2.5" - 3" lift from a 86 or so CJ that my mom and dad had and stuck it on. It was pretty much the same except for a few little things. Not really as easy as it sounds.

    It has been road and trail tested already. It was road tested 1st because we HAD to drive to the power lines.

    Check it out.

    Anyone know where I can get some free or cheap 31" tires on jeep rims?

    MD Welding & Fabricating
    Attached Files

  • #2
    Cool deal Mike. I saw some tires in my backyard on my Jeep . I just bought a 1986 CJ7 for 300 bucks, haven't done anything with it yet. Motor is seized, bought 2 cans of Kroil oil to squirt in it, should have it unlocked in a week or so. If not there is a nice 302 Ford ready to go in sitting in my basement...Bob


    • #3
      Originally posted by MD Welding View Post
      The dealer looked at it . . . and said it cound not be fixed . . . .
      The dealer was wrong. Very wrong.

      Nice work.


      • #4
        i dont think i would want to do buisness with a dealer like that. he must have been haveing a good laugh with his frends when he was telling them how he made a great sale today. people like that give care dealers a bad name.
        if it couldnt be are you driveing it???


        • #5
          HOLLY CRAP!! that is one nice looking free-bee. i cant believe he just gave it up due to a break isue ???? you scored big time on that one and the dealer needs a black eye.


          Special Offers: See the latest Miller deals and promotions.