Announcement

Collapse
No announcement yet.

Welding Table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welding Table

    Finally got the basic table done. For those who care about such things the top is 30" x 40" X 1/2", the base is 2"x 1/4" sq tubing, the legs & shelf bracing is 2" X 2" X 3/16" angle, the shelf is #9 3/4" flat, & the casters are HF 330# cast centers. The basic table is simple, nothing fancy although I plan on adding a fold down cutting grid, vice, and other stuff at some point.
    Attached Files
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

  • #2
    Nice looking table

    I really like the table you built..it really looks nice. I'd say you do good quality work you can be proud of. Thanks for sharing, Farris
    Gone But Never Forgotten!

    Comment


    • #3
      Thanks for the good words
      Regards, George

      Hobart Handler 210 w/DP3035 - Great 240V small Mig
      Hobart Handler 140 - Great 120V Mig
      Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

      Miller Dynasty 200DX with cooler of my design, works for me
      Miller Spectrum 375 - Nice Cutter

      Comment


      • #4
        Hmmm. That table seems familiar, like I have seen it somewhere before.

        Looks good over here too! Nice work George
        Dynasty 350DX
        Dynasty 200DX TigRunner
        MM 350P
        MM Passport Plus
        Spectrum 375 Extreme
        08' Trailblazer 302

        Comment


        • #5
          hobart message board

          I think you saw it over at the hobart message board too.

          Anyways, great job on the table

          Comment


          • #6
            I didn't want to anyone to feel left out.
            Regards, George

            Hobart Handler 210 w/DP3035 - Great 240V small Mig
            Hobart Handler 140 - Great 120V Mig
            Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

            Miller Dynasty 200DX with cooler of my design, works for me
            Miller Spectrum 375 - Nice Cutter

            Comment


            • #7
              nice work sundown
              AIM: Zachary188

              Comment


              • #8
                Sundown,

                In you last photo (table Top on ) it showed your bender. Who made it? Can you post some photos of it?


                Thanks
                Jim

                Comment


                • #9
                  Originally posted by Trap Doctor
                  Sundown,

                  In you last photo (table Top on ) it showed your bender. Who made it? Can you post some photos of it?


                  Thanks
                  Jim
                  Here is a link to the place I bought mine from. http://cgi.ebay.com/Sheet-Metal-Pede...QQcmdZViewItem
                  Regards, George

                  Hobart Handler 210 w/DP3035 - Great 240V small Mig
                  Hobart Handler 140 - Great 120V Mig
                  Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                  Miller Dynasty 200DX with cooler of my design, works for me
                  Miller Spectrum 375 - Nice Cutter

                  Comment


                  • #10
                    George, you might want to cover your fishing reels. The UV rays from your welders will break down your fishing line. Don't want the big one to get away...

                    Comment


                    • #11
                      Originally posted by 911Handyman
                      George, you might want to cover your fishing reels. The UV rays from your welders will break down your fishing line. Don't want the big one to get away...
                      Didn't think about that, thanks ... I re-spool with new line in the spring every year, I will make a drop cloth to hang over them.
                      Regards, George

                      Hobart Handler 210 w/DP3035 - Great 240V small Mig
                      Hobart Handler 140 - Great 120V Mig
                      Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                      Miller Dynasty 200DX with cooler of my design, works for me
                      Miller Spectrum 375 - Nice Cutter

                      Comment


                      • #12
                        that explains why

                        Originally posted by 911Handyman
                        George, you might want to cover your fishing reels. The UV rays from your welders will break down your fishing line. Don't want the big one to get away...
                        That explains why the big one got away! *LOL*
                        Farris
                        Gone But Never Forgotten!

                        Comment


                        • #13
                          Welding table

                          Looks good

                          Good job Sundown
                          Millermatic 212
                          3035 Spool gun
                          Miller Spectrum 375
                          sigpic

                          Comment


                          • #14
                            Kudos on the table...

                            Sundown - clever design on the locking casters, where did you get that idea? From what it looks like, you keep them from rolling and swiveling with a single bolt that threads all the way down to the wheel, correct?

                            I've been trying to figure out a way to keep my table mobile but stable at the same time, something by way of retractable casters or something. But I like your idea.

                            Comment


                            • #15
                              weilding table

                              sundown nice job is that a ring roller in the back ground
                              what make is it

                              Comment

                              Working...
                              X