Announcement

Collapse
No announcement yet.

Just joined

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just joined

    Just come over from the Ask Andy & Hobart boards. One question, on the other boards I get the full screen, here I seem to be missing the right 25%. Actually I am getting the full screen, it's just narrower. If thats the way it is here, no problem, if not anyone know how to fix it? Thanks
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

  • #2
    Sundown,
    I also get the same size screen here,but get the full deal at Millermotorsports and hobart.I`m not sure if it`s the way the forum is set up or our computers.I guess your not alone in this,hopfully someone with more computer savy than me will help us out.

    Comment


    • #3
      Originally posted by Stick rod
      Sundown,
      I also get the same size screen here,but get the full deal at Millermotorsports and hobart.I`m not sure if it`s the way the forum is set up or our computers.I guess your not alone in this,hopfully someone with more computer savy than me will help us out.
      No big deal if it stays this way, looks like a nice place I need to read all the posts soon as I get time.
      Regards, George

      Hobart Handler 210 w/DP3035 - Great 240V small Mig
      Hobart Handler 140 - Great 120V Mig
      Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

      Miller Dynasty 200DX with cooler of my design, works for me
      Miller Spectrum 375 - Nice Cutter

      Comment


      • #4
        Seems all the forums use my screen differently. It's funny that I didn't even notice this one's oddity until you brought it up, George.

        This forum is growing, welcome over.

        Comment


        • #5
          Originally posted by MAC702
          Seems all the forums use my screen differently. It's funny that I didn't even notice this one's oddity until you brought it up, George.

          This forum is growing, welcome over.
          Thanks Mac ... BTW how is the STH treating you? And do you still have your Maxstar 140?
          Regards, George

          Hobart Handler 210 w/DP3035 - Great 240V small Mig
          Hobart Handler 140 - Great 120V Mig
          Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

          Miller Dynasty 200DX with cooler of my design, works for me
          Miller Spectrum 375 - Nice Cutter

          Comment


          • #6
            I LOVE the STH. I've been so busy, I've yet to TIG with it, but that'll change by this weekend. I finally got a new 250 CF Argon, so that should give me plenty of arc time, too.

            I sold the 140 STR before we went to Colombia to help finance the trip. I got a good price from a friend that wanted to help us out, and I knew I wanted to upgrade to the STH as soon as I could.

            Most of the work that's been coming in has needed the Trailblazer or PowCon for heavy stick work, or has been light fabrication with the HH135. But I've been back a few months now and word is getting around... By the time I'm in serious demand, we'll be going back to South America for the summer again! But I wouldn't trade this life for anything! And I'm taking the STH with me!

            Comment


            • #7
              I have full screen..Welcome aboard!

              Welcome..you will like it here..Very few fights here!
              Regards, farris
              Gone But Never Forgotten!

              Comment


              • #8
                Originally posted by fyoung
                Welcome..you will like it here..Very few fights here!
                Regards, farris
                Thanks, do you know why you have full screen? Are you running windows IE?
                Regards, George

                Hobart Handler 210 w/DP3035 - Great 240V small Mig
                Hobart Handler 140 - Great 120V Mig
                Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                Miller Dynasty 200DX with cooler of my design, works for me
                Miller Spectrum 375 - Nice Cutter

                Comment


                • #9
                  Originally posted by MAC702
                  I LOVE the STH. I've been so busy, I've yet to TIG with it, but that'll change by this weekend. I finally got a new 250 CF Argon, so that should give me plenty of arc time, too.

                  I sold the 140 STR before we went to Colombia to help finance the trip. I got a good price from a friend that wanted to help us out, and I knew I wanted to upgrade to the STH as soon as I could.

                  Most of the work that's been coming in has needed the Trailblazer or PowCon for heavy stick work, or has been light fabrication with the HH135. But I've been back a few months now and word is getting around... By the time I'm in serious demand, we'll be going back to South America for the summer again! But I wouldn't trade this life for anything! And I'm taking the STH with me!
                  I am glad to hear its working out, I just thought that if you had the 140 I might take it off your hands, I would kinda like to have a quality 120V stick, I am still thinking about just picking up a T/A 85 for about $200 just to have something around, although I really don't need it.
                  Regards, George

                  Hobart Handler 210 w/DP3035 - Great 240V small Mig
                  Hobart Handler 140 - Great 120V Mig
                  Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                  Miller Dynasty 200DX with cooler of my design, works for me
                  Miller Spectrum 375 - Nice Cutter

                  Comment


                  • #10
                    IE 6 & XP

                    George, I'm using IE 6 and Win XP..I'm not sure why your screen is smaller.
                    regards, Farris
                    Gone But Never Forgotten!

                    Comment


                    • #11
                      I'm having the same problem as George and I'm running XP as well. I can live with it but I am curious why it is this way.

                      Comment

                      Working...
                      X