Announcement

Collapse
No announcement yet.

Steel Max

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Steel Max

    This Saw Is A Steel Cuter It Has A Comparment On The Side That Catches The Slevers Of Steel When Cutting. An The Steel Doesnt Get Hot When Cutting. I Use It On Alum. Too It Is Pretty Handey In The Felid Where You Need A Clean Cut

    Click image for larger version

Name:	tmpphpEUu606.jpg
Views:	1
Size:	76.5 KB
ID:	519921

    Click image for larger version

Name:	tmpphpcJ6jWn.jpg
Views:	1
Size:	81.1 KB
ID:	519922

    Click image for larger version

Name:	tmpphplx6ULM.jpg
Views:	1
Size:	88.8 KB
ID:	519923

    Click image for larger version

Name:	tmpphpnE0P4K.jpg
Views:	1
Size:	64.8 KB
ID:	519924
    miller bobcat 250
    wc 115a
    spoolmatic 30a
    centery 250 mic
    2 lincoln 225 stick
    a 1954 hobart portable welder w/ willies jeep engine

  • #2
    they also make a good mag drill.have the original one that only takes the annular cutters but just recenty bought the new model that also takes a morse taper drill chuck or a drill bit
    301 trailblazer
    12vs extreme mig box
    spectrum plus plasma
    steelmax mag drill
    millwaukee steel cutting skillsaw

    dewalt 14" cold cut off saw
    various hand &power tools
    spoolmatic 30a

    Comment


    • #3
      Mag Drill

      Havent Seen That One Yeat We Got That Saw About A Year Ago From A Lawson Dealer That Was The First Time I Have Seen It Thanks For The Reply
      miller bobcat 250
      wc 115a
      spoolmatic 30a
      centery 250 mic
      2 lincoln 225 stick
      a 1954 hobart portable welder w/ willies jeep engine

      Comment


      • #4
        Nice saw. First time a salesman demonstrated one, everybody stepped back thinking the teeth would come off. It was an evolution brand. Cut right through a piece of 3/8" plate, nice and smooth
        Scott
        HMW [Heavy Metal welding]

        Comment


        • #5
          I use both the saw and the older model drill at work.

          I find the saw works well for thin guage steel up to 1/4" plate when the collector cover is removed. If not, I find the chips pile up very quickly generating friction and heat bogging the saw down. I use rapid tap and machinist's coolant while cutting, it has seemed to keep the blade in good shape for quite some time now.
          The drill works very well although I wish it had tapping functions. It's the only mag drill annular cutter system that I've used that has its own lube feed. I like the fact that the drill has a safety device in it so that if there isn't enough magnetic grip the drill switch automatically shuts off. I've used it to mill slots 11/16" wide (using the bit like a router, the drill stationary, and material sliding in a jig) into 5/8" X 2" cold rolled steel. After attempting this totally incorrect use of the machine, the annular cutter and machine were in perfect condidtion. I'll try to post pics. It bores good quallity holes up to 2 3/8" by 2" deep.
          Last edited by JonnyTIG; 05-01-2007, 06:45 PM.
          Jonny

          Dynasty 300DX
          Esab PCM 1000

          Comment


          • #6
            steel max

            sounds like this saw has been around for sometime now i just seen it a year and half ago and picked it up a year ago havent seen the drill that you jonnnytig and cajuncat is talking about.
            miller bobcat 250
            wc 115a
            spoolmatic 30a
            centery 250 mic
            2 lincoln 225 stick
            a 1954 hobart portable welder w/ willies jeep engine

            Comment


            • #7
              The auto lube system is really nice.The new model also lets you select two different speeds which is real helpful on the bigger holes.Just used it today to drill some 1 7/8 holes in 1 1/2 with no problems.Will have to try and set the drill up by the holes and post a picture of it.
              301 trailblazer
              12vs extreme mig box
              spectrum plus plasma
              steelmax mag drill
              millwaukee steel cutting skillsaw

              dewalt 14" cold cut off saw
              various hand &power tools
              spoolmatic 30a

              Comment


              • #8
                SteelMax as been at the Air Liquide tent shows over here in Hawaii for 3 (I think) years now. bought the chop saw last month and LOVE IT!!! Came with an extra blade for steel. He said I could cut a little alum with it, but if I did a lot, I should buy the alum blade (more teeth).
                bert
                I'm not late...
                I'm just on Hawaiian Time

                Comment

                Working...
                X