No announcement yet.

Finding the Message Board

  • Filter
  • Time
  • Show
Clear All
new posts

  • Finding the Message Board

    Why is there not a direct link to the message board? To get to the message board you have to go through three different links. It would be easier to get to the forums and it would allow access to new members, who would otherwise not realize the forums exsist.
    When in doubt Weld It

  • #2
    This should work for you
    Craftsman Colormatic AC
    Victor Journyman Setup
    Syncrowave 180 SD
    MM210 With Spoolgun
    Dynasty 200 DX
    Spectrum 625 Plasma Cutter
    Miller HD Tape Measure


    • #3
      I meant for there to be like a link on the homepage to click on for new members to realize there is a forum for Miller. There used to be one when the message board first started, but now it would be very hard for a new member to come upon this area in this website.
      When in doubt Weld It


      • #4
        me too!

        I've had the same problem..I finally just saved the link in my favorites. Miller needs to have a link to the forum on their home page not 2 clicks away. it was an accident the first time I ran across it. Maybe they will add a link on the home page in the future..I'm sure it would get more hits.
        Thanks, Farris
        Last edited by fyoung; 01-29-2006, 11:34 AM. Reason: err
        Gone But Never Forgotten!


        • #5
          yea put a link on the homepage, advertise do something. this could be a great forum.


          • #6
            This forum does have alot of potential, but if the people that come to the website cant find it or dont know it exsists it will never reach its true potential.
            When in doubt Weld It


            • #7
              Thanks for the feedback, I'll pass your suggestion along.

              Kevin Schuh
              Service Technician
              Miller Electric Mfg. Co.


              • #8
                Google mesage board

                I usually just google "miller welds message board". Then just clicked on the first result. It works for me.


                • #9
                  Click on your favorites button at tha top of explorer and click add to favorites. This is the easiest way back to your favorite sites.


                  • #10
                    How ironic.....

                    Klugger said: "To get to the message board you have to go through three different links"

                    That is soooo funny. I have the link to the board on my google homepage. When I want to look at the main site, I go through the message board.

                    Ammonia refrigeration tech
                    Trailblazer 302 (yes, it's new)
                    Millermatic 180 w/Autoset
                    HF-15 High frequency
                    XR15 w/Push-Pull Gun
                    Victor O/A, DeWalt, North mask

                    "A professional knows what to do. A craftsman knows why."


                    • #11
                      Thanks everyone for the feedback! We are in the process of reveiwing our site organization...and making it easier to get to this board is one of the items on our list. People come to our website for a variety of reasons and we try to help them get where they want to go as quickly as possible.

                      In the meantime, we did cut out one click by adding a link under the "Project Ideas & Plans" (from the home page). Hope this helps.


                      • #12
                        Thank You, I think that will make the site much better and more accessable to new members.
                        When in doubt Weld It


                        • #13
                          sounds good

                          That's sounds like a good idea!
                          Last edited by fyoung; 01-29-2006, 11:36 AM. Reason: updated
                          Gone But Never Forgotten!