Announcement

Collapse
No announcement yet.

Scroller

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scroller

    I'm not sure if it's spelled right but does anyone have plans or pics of a home made scroller? Something smaller for 1/4 round maybe. I'm open to ideas.

    Thanks
    Mike
    MD Welding & Fabricating L.L.C.
    Mike
    MD Welding & Fabricating L.L.C.
    mdwelding@sbcglobal.net

  • #2
    This gets asked alot on all 3 boards. You can buy one from a guy on ebay that builds them in is garage, or get a cheapie HF, my buddy got a free one from HF with a bender purchase. Or you can get the top of the line model from http://www.shopoutfitters.com/ . I have theirs and would not even attempt to build one because i could not do better than what they sell. Anyway here is some good reading...Bob
    http://www.hobartwelders.com/mboard/...ad.php?t=17297
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment

    Working...
    X