Announcement

Collapse
No announcement yet.

weld table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • weld table

    anybody have some pics of a heavy duty welding table? I would like some ideas for my new one.

  • #2
    In the foreground you can see part of ONE of our tables. It's a skeleton design, which we favor for most of our fabrication work, made of 3" x 3" x 5/16" angle.
    Attached Files

    Comment


    • #3
      This time you can see a different table in the background made of the same material. Sorry these really aren't table pics, but maybe you can see enough of them to at least see what we are using.
      Attached Files

      Comment


      • #4
        It is not a welding table but I use it for a workbench and a welding table. I always weld jigs to it.

        tjsperformance.com/workbench.htm
        Last edited by envano; 08-21-2007, 02:06 PM. Reason: broken link
        Miller Dynasty 300DX
        HTP MIG 240
        HTP 380 Plasma

        Bridgeport Milling Machine
        South Bend Lathe
        Etc. Etc....
        tjsperformance.com

        Comment


        • #5
          No pics but my table has a 1" thick x 48" x 96" top. It is 32" from floor to the top surface. It has a 4" ship channel frame with 6" HD casters.---MMW---

          edit-- Don't forget to leave an overhang for clamping stuff.
          Last edited by MMW; 01-23-2006, 08:37 PM.
          MM250
          Trailblazer 250g
          22a feeder
          Lincoln ac/dc 225
          Victor O/A
          MM200 black face
          Whitney 30 ton hydraulic punch
          Lown 1/8x 36" power roller
          Arco roto-phase model M
          Vectrax 7x12 band saw
          Miller spectrum 875
          30a spoolgun w/wc-24
          Syncrowave 250
          RCCS-14

          Comment


          • #6
            nice tables

            Loks like Mac has some nice tables..I'm sure they come in handy.
            Farris
            Gone But Never Forgotten!

            Comment


            • #7
              Table

              Here is a pic of my welding table
              http://groups.msn.com/holyshift/52ma...o&PhotoID=1023

              48x 48 x 1" thick, has lots of overhang to clamp stuff to. 1 foot is adjustable to take any rock out of it. Each leg has a holder for the tig torch.

              Next time the only thing I would do different is, make it 48 x 96, and instead of the cross bracing currently going around the outside of the bench at the bottom. Would be to run them diagonally into the center, and have the lower "foot rail" in about another 6 inches. This will allow more room for the foot pedal.
              MM 130 110v Mig
              Spectrum Cutmate 300 110v/240v Plasma
              Syncrowave 250 Tig, oldie but welds nice
              Dynasty 300 DX Tig, very nice machine, AC doesn't start most of the time

              Comment


              • #8
                over hang

                You're right a person needs to remember to leave some overhang for clamping..
                Thanks, farris
                Gone But Never Forgotten!

                Comment

                Working...
                X