If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
did any body have to register their new machine, did it come with a registration card? i cant remember if mine did. or if they can tell by the serial number on the machine?? thanks
If you are talking about Miller they go by the serial number, if you want to register it then go to www.millerwelds.com/register and put in the information for your purchase.
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
if you have your recept they will go by that if not they go by the ser# unless you dealer did it for you, might give him a call and see. eather way Miller is realy good about there warente work.
thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
The dealer that I bought mine from sent the warranty in for me and I had a problem about 1 year later and they had no record of it. I contacted miller and they took care of my problem as soon as I gave them the serial number.