Announcement

Collapse
No announcement yet.

Chop Saw vise HELP!!!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 84ZMike
    started a topic Chop Saw vise HELP!!!!

    Chop Saw vise HELP!!!!

    I have a Dewalt Chop saw I picked up the other day used and it is missing the vise.....guy said he thinks he has it....after doing some looking seems like the quick lock threads of the DW871 were bad for breaking......wonder what happened to this one.....so I was wondering if anyone had one / had a source for the parts....every where I'v looked they want $49.00 for one.....I could buy a HF saw for that and remove the vise.....
    Thanks,
    Mike

  • Donald Branscom
    replied
    Never try to make a angle cut on a metal chop saw without clamping does the metal. You can get seriously hurt. Seen it happen.
    Metal must be clamped down.

    Leave a comment:


  • drmccandless
    replied
    saw

    Originally posted by dabar39 View Post
    I have 2 old milwaukee chop saws,1 with broken handle and 1 with broken motor case if either one of these will work for you send me an address and I will mail the vise part from it to you. I've been saving them for parts. Dave
    Hello I know this is an old posting but was wondering if you still had your broken chop saws still around for parts..? I am in need of a vise and backing plate...Thank you...David...

    Leave a comment:


  • drmccandless
    replied
    chop saw vise

    Could use a vise and backing plate for a Dewalt 14" chop saw...Thank you

    Leave a comment:


  • 84ZMike
    replied
    Thanks bro....I'v got one on the way from Tx....
    Mike

    Leave a comment:


  • dabar39
    replied
    chopsaw vise

    I have 2 old milwaukee chop saws,1 with broken handle and 1 with broken motor case if either one of these will work for you send me an address and I will mail the vise part from it to you. I've been saving them for parts. Dave

    Leave a comment:

Working...
X