Announcement

Collapse
No announcement yet.

Welding rig headahes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welding rig headahes

    I just got a new millermatic 350P. I am having problems getting it to turn on. I don't know if it is wired wrong or what. If anyone has any advice, I sure could use it.

  • #2
    if memory serves me, that is a single or three phase machine correct? wich are you running it on? you say new, do you mean fresh out of the box?
    The one that dies with the most tools wins

    If it's worth having, it's worth working for

    Comment


    • #3
      Look in section 3-14 of the manual and check to make sure you're linked for the right input voltage. That's the problem.

      Hank
      ...from the Gadget Garage
      Millermatic 210 w/3035, BWE
      Handler 210 w/DP3035
      TA185TSW
      Victor O/A "J" series, SuperRange

      Comment


      • #4
        If you are worried about went you turn the switch on,the machine does not start right away that is normal. It usually takes a few seconds for the processor to acknowledge what current voltage it is being feed.

        Comment


        • #5
          Originally posted by wyomin900
          I just got a new millermatic 350P. I am having problems getting it to turn on. I don't know if it is wired wrong or what. If anyone has any advice, I sure could use it.
          Miller's phone # is in your owners manual....Call them...
          They want your new welder to work right for you!
          Syncrowave 180 SD
          MM185 with 3035 Spool gun
          1971 Roughneck 1e
          Stars-n-Stripes BWE
          Optrel Satellite OSE
          ESAB 875 Plasma Torch
          Lincoln 200SA Diesel
          O/A Set
          Century 250A/C-D/C BuzzBox
          1.5 kVA Spot Welder
          Phoenix Electrode Conditioning Oven

          Professional Auto Mechanic since 1974
          My own shop since 1981

          Cya Frank

          Comment


          • #6
            wyomin900,

            Did you get up and running or are you still having issues? Drop me an e-mail or give me a call if need help.


            Kevin

            KSchuh@Millerwelds.com
            Ph: (920) 735-4505
            Kevin Schuh
            Service Technician
            Miller Electric Mfg. Co.

            Comment

            Working...
            X