Announcement

Collapse
No announcement yet.

350 syncro lx sequencer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 350 syncro lx sequencer

    Can anyone tell me the practical uses of the sequencer on this welder.

    And also some examples of how to maybe use it.

    Also any tips on what settings to use for the pulser.

    Thanks for answering the noob questions but I haven't recieved a handbook for it yet and and would like to start experimenting.

    Ben
    Ben Fox
    www.FOXPERFORMANCEENGINES.com

    Miller Dynasty 300 SD
    Millermatic 130
    MillerMatic 252
    Jet Lathe
    Jet Mill
    Rottler SG7 seat and guide machine

  • #2
    Originally posted by FoxPerformance
    Can anyone tell me the practical uses of the sequencer on this welder.

    And also some examples of how to maybe use it.

    Also any tips on what settings to use for the pulser.

    Thanks for answering the noob questions but I haven't recieved a handbook for it yet and and would like to start experimenting.

    Ben
    not aware of any sequencer you must have a newer model than me, as for the pulser just experiment the machine can run it safely through it's entire range. you said you don't have a handbook you can download a manual here reading the pulser section in the manual helps you to understand what dials adjust what.

    good luck!
    The one that dies with the most tools wins

    If it's worth having, it's worth working for

    Comment


    • #3
      It's a 1999 model syncrowave 350 LX
      Ben Fox
      www.FOXPERFORMANCEENGINES.com

      Miller Dynasty 300 SD
      Millermatic 130
      MillerMatic 252
      Jet Lathe
      Jet Mill
      Rottler SG7 seat and guide machine

      Comment


      • #4
        mine is a 2000 model and the sequencer option wasen't installed, sorry can't help ya out
        The one that dies with the most tools wins

        If it's worth having, it's worth working for

        Comment

        Working...
        X