Announcement

Collapse
No announcement yet.

Dynasty 280 DX with CV !!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dynasty 280 DX with CV !!!

    Holy Cow!!!
    Where will it all end ??
    I came up on my latest email when I searched all over their site on my phone.
    I didn't find it on the regular Tig products section with my computer.
    Part # 907514007

    www.facebook.com/outbackaluminumwelding
    Miller Dynasty 700...OH YEA BABY!!
    MM 350P...PULSE SPRAYIN' MONSTER
    Miller Dynasty 280 with AC independent expansion card
    Miller Dynasty 200 DX "Blue Lightning"

    Miller Bobcat 225 NT (what I began my present Biz with!)
    Miller 30-A Spoolgun
    Miller WC-115-A
    Miller Spectrum 300
    Miller 225 Thunderbolt (my first machine bought new 1980)
    Miller Digital Elite Titanium 9400

  • #2
    They have it right in the header on the home page this evening. What a fantastic idea--and actually probably not that hard for them to have figured out with the 280 being pretty much a software defined machine.

    Comment


    • #3
      late to the party

      http://www.millerwelds.com/resources...nasty-280dx-cv

      HTP Invertig221 D.V. Water-cooled
      Eastwood MIG175 w/spoolgun
      Eastwood Versacut40 Plasma cutter

      Comment


      • #4
        Originally posted by OscarJr View Post
        If you knew me you wouldn't be a bit surprised!
        The crazy thing about this is it needs a separate feeder.

        www.facebook.com/outbackaluminumwelding
        Miller Dynasty 700...OH YEA BABY!!
        MM 350P...PULSE SPRAYIN' MONSTER
        Miller Dynasty 280 with AC independent expansion card
        Miller Dynasty 200 DX "Blue Lightning"

        Miller Bobcat 225 NT (what I began my present Biz with!)
        Miller 30-A Spoolgun
        Miller WC-115-A
        Miller Spectrum 300
        Miller 225 Thunderbolt (my first machine bought new 1980)
        Miller Digital Elite Titanium 9400

        Comment


        • #5
          lol. Yea, there's no way they can shoe-horn a whole MIG unit into the already compact chassis that is the 280dx. It's still a pretty good setup for those that can utilize it.
          HTP Invertig221 D.V. Water-cooled
          Eastwood MIG175 w/spoolgun
          Eastwood Versacut40 Plasma cutter

          Comment


          • #6
            Originally posted by FusionKing View Post
            ...The crazy thing about this is it needs a separate feeder.
            Well, that's the dumb part that's a real space/weight hog, and lots of guys already have a feeder that will plug right in. Plus, you can put just the feeder closer to the table, and leave the power supply more out of your way.

            Or not have the feeder's space/weight in the way when using another process.

            Comment

            Working...
            X