Announcement

Collapse
No announcement yet.

Wire Feed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wire Feed

    I own a Millermatic 35 and have replaced the liner and it still wont feed wire the rollers just slip on the wire and there is no tension on the roll.??

  • #2
    Last thing to suspect is the liner.

    First is contact tip. Verify it's marked same size as wire. What is its condition? And try feeding without one first.

    What wire are you running? What type of drive rolls, and how are they marked?

    When was the last time everything worked and what has changed since then?

    What do you mean 'no tension on the roll?'

    Can you feed the wire by hand through the liner and gun?

    Comment


    • #3
      Pull the gun off the machine and see if it feeds wire without it. Plus everything MAC said...Bob
      Bob Wright

      Spool Gun conversion. How To Do It. Below.
      http://www.millerwelds.com/resources...php?albumid=48

      Comment

      Working...
      X