Announcement

Collapse
No announcement yet.

D-64 Feeder voltage setting

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • D-64 Feeder voltage setting

    Ive been struggling setting the voltages/wfs d-64 feeder and deltaweld 302 welder at work. I know I should be able to dial it in by sound/how it welds but Im new at this and disappointed in my results. Voltage and wfs are adjusted by dials that range from 0-10. Wfs i know the dial number multiplied by 100 will give the actual wfs but I dont know how to figure the actual voltage settings in relation to the 0-10 on the dial. Sorry for the dumb question and thanks for any advice you may have.
    Matt

  • #2
    Think Ive figured it out. The voltage range on the machine is 10-32 V. The lowest setting, 1, on the voltage dial would be 10 volts and 10 (max) would be 32 V. Turning the dial up 1 should be a 2.2 V increase, is this correct?

    Comment


    • #3
      Correct.

      Comment

      Working...
      X