Announcement

Collapse
No announcement yet.

Millermatic 35 wiring oddity

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Millermatic 35 wiring oddity

    I picked up a MM35 serial #JK656786. It was said to be in use in a production facility up until about 2 months ago, when they closed down. I don't know what operation they were using it for. Ziptied to the 220v power cord for the machine is an additional 110v cord that runs inside and goes to CR1 and a relay and then exists the machine with a female 110v cord end. I'm trying to figure out what they were trying to accomplish. I'll add some more pics in a little while, hopefully that will clarify things.

    This is what's in place for CR1, has this already been replaced?

    Last edited by thomas1; 10-20-2017, 12:34 PM.

  • #2
    Is there a way to get full size pics?

    Comment


    • #3

      Comment


      • #4
        Upon closer inspection, that 110v cord runs to the 24v transformer, then to a relay that is connected to a sensor that is aimed at the wire spool. Evidently they were using the movement of the spool to control power to whatever was connected to the 110v cord coming off the back of the machine.

        i believe I'm going to remove all that stuff prior to using the machine.

        Comment


        • #5
          Might have been some sort of turntable or positioner... Steve

          Comment


          • #6
            I would wind the cord up and leave it as is if it worked ok.

            www.facebook.com/outbackaluminumwelding
            Miller Dynasty 700...OH YEA BABY!!
            MM 350P...PULSE SPRAYIN' MONSTER
            Miller Dynasty 280 with AC independent expansion card
            Miller Dynasty 200 DX "Blue Lightning"

            Miller Bobcat 225 NT (what I began my present Biz with!)
            Miller 30-A Spoolgun
            Miller WC-115-A
            Miller Spectrum 300
            Miller 225 Thunderbolt (my first machine bought new 1980)
            Miller Digital Elite Titanium 9400

            Comment

            Working...
            X