Announcement

Collapse
No announcement yet.

Maxstar 200 not welding...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Maxstar 200 not welding...

    Hey Guys: I hope this reaches you all well...

    I have a Maxstar 200 that isn't producing any weld power...

    she is not throwing any fault codes, and the touchpad and readouts seem to be function just fine, but I'm not getting any power to stick weld...

    wired for 110; black & white are wired to line in, ground to ground...

    i can link a video if that's helpful...

    curious as to where I can start looking, before bringing her to a service center... (Airgas...?)

    I'm fair with electronics, but have a lot to learn to

    Jay

  • #2
    Is it new to you or was it working fine yesterday and you haven't changed anything?

    Is it maybe set-up for a remote at the moment?

    Comment


    • #3
      Originally posted by MAC702 View Post
      Is it new to you or was it working fine yesterday and you haven't changed anything?

      Is it maybe set-up for a remote at the moment?
      Yes, new to me...

      i did fail to mention in 1st post; she powered up, with no fault codes, so figured all was good... I was told it would arc weld, but was having issues Tig'ing... maybe user error?

      I didn't pay too much, so willing to fix if that's what it needs... it wouldn't surprise me if it was dropped

      i can switch it off remote to output and it does nothing...

      let me put up a you tube....

      j

      Comment


      • #4
        See if maybe you guys notice anything outta the ordinary...

        Thanks for any and all help.

        Jay
         

        Comment


        • #5
          Does anyone have a service manual for this machine? Or where can I get one?

          Comment


          • #6
            Originally posted by gr40rcapri View Post
            Does anyone have a service manual for this machine? Or where can I get one?
            https://www.millerwelds.com/files/ow...O2226Q_MIL.pdf
            Instagram: https://www.instagram.com/polarweldFIN/
            Web: https://polarweld.com/

            Comment


            • #7
              That's an owner's manual, not a service manual.

              Comment


              • #8
                Originally posted by MAC702 View Post

                That's an owner's manual, not a service manual.
                ..my mistake..
                Instagram: https://www.instagram.com/polarweldFIN/
                Web: https://polarweld.com/

                Comment

                Working...
                X