Announcement

Collapse
No announcement yet.

Miller 44D output

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Miller 44D output

    We have a miller trailblazer 40 4D serial number is JE789397 it worked fine the last time we used it. started up no output at all

  • #2
    When you say "no output at all," please verify you checked all three polarities: DC-. DC+, and AC. Do you have 120V AC at the receptacle?

    You have a model number typo in your post, I'm assuming, as if it was from a speech-to-text program or something. I went off the model number provided in the subject line.

    Comment


    • #3
      Yes sorry about that 44D no out put AC DC or 120 ac

      Comment


      • #4
        How long ago was "the last time"? Generator rotor may have lost its residual magnetism needed to kick things off.

        I would start with cleaning the three rotor slip rings with some 320grit sandpaper and if it still won't wake up apply 12VDC(+) to the center slip ring brush terminal (lead #5) and 12VDC(-) to brush terminal of lead #6 for a couple seconds with the unit running.
        MM200 w/spot controller and Spoolmatic 1
        Syncrowave 180 SD
        Bobcat 225G Plus LPG/NG w/14-pin*
        *Homemade Suitcase Wire Feeder
        *HF-251D-1
        *WC-1S & Spoolmatic 1
        PakMaster 100XL
        Marquette "Star Jet" 21-110
        http://www.millerwelds.com/images/sm...rolleyes.png?2

        Comment

        Working...
        X