Announcement

Collapse
No announcement yet.

Foot pedal value for tig

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    If it is an L-Tec built machine

    this is the likely pedal ... (call SSC to confirm)

    https://www.ssccontrols.com/product/...ontrol-pedals/

    https://www.ssccontrols.com/wp-conte...t-Controls.pdf

    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #17
      Thanks guys, probably sell this one and just pay the 160 some bucks for a new one on fleabay

      Comment


      • #18
        D, not good here. The corps of engineers opened the flood gates, literally. That has completely knocked out or water supply, there treatment plant, pump station and wells are all under a water. A lot of it. Zero running water. Not having running water is a bigger disaster than the flooding we got. Could be worse though, could be bleeding and not have running water. Not dead, can't quit.

        Comment


        • #19
          .....
          Last edited by shootist2; 09-01-2017, 04:11 PM.

          Comment


          • #20
            Hang in there your in our thoughts

            Comment


            • #21
              I figured out what pot value for this machine.
              Its a 10k ohm pot,whick happens to be in the new harbour frieght vulcan tig pedal
              Which i picked up for 79.99 plus tax,it has an all metal case.
              The internals are plastic.
              The new syncrowave 250 at work has an ALL PLASTIC pedal,so this should work!

              Comment


              • #22
                Did you ever confirm who made your machine?

                Comment


                • #23
                  Click image for larger version

Name:	ESAB Heliweld 5.jpg
Views:	1
Size:	13.5 KB
ID:	586703

                  Tigerchevelle,

                  Your machine appears to be made by ESAB.
                  EWP 1341- 0300

                  Since you mention it uses a 6 pin rectangular Cinch-Jones plug, this remote may be the correct one.

                  https://www.ssccontrols.com/product/...ontrol-pedals/
                  Miller Dynasty 350, Dynasty 210 DX, Hypertherm 1000, Thermal Arc GTSW400, Airco Heliwelder II, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.

                  Call me the "Clouseau" of welding !

                  Comment

                  Working...
                  X