Announcement

Collapse
No announcement yet.

Syncrowave 351

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Syncrowave 351

    The high frequency was working one day and the next no high frequency start.<br>i have the contacts and settings, are are all ok.&nbsp;<br>Checked terminals 31 to 32 and there is no voltage when stepping on the foot pedal. Do have power at the receptacle, runs water cooler.<br>any ideas, relay board bad?.

  • #2
    well, as it works one day to the next, either your torch conduit is corroded, or you have a c.r.a.p. ground clamp

    Comment

    Working...
    X