Announcement

Collapse
No announcement yet.

miller tig contractor kit

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • miller tig contractor kit

    Miller has contractor kit (part # 301130) for their Multimatic 200 welder. It is compatible with their Dynasty 200 welder?
    They offer contractor kits (#195054 -foot pedal and #195055 - finger tip)

    How about the other way around?
    Lets say I get kit for Dynasty, will it fit/work with Multimatic?
    Thanks.

  • #2
    The Multimatic 200 uses 25-mm (small) Dinse-style gas thru for one-piece air-cooled torches., and a 6-pin plug for the foot control. The Dynasty uses the 50mm DINSE, external gas and a 14-pin plug.

    With the Dynasty kit, you need an adapter, 14-pin to 6-pin #300507 .... and, the proper DINSE adapter #195234 for the air-cooled torch.
    Last edited by GlenC; 08-24-2014, 10:01 PM.
    Glen
    Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45
    For Sale! - Hobart Handler 150 - Miller EconoTwin HF

    Comment


    • #3
      miller tig contractor kit

      thanks for the info. I guess I'll buy Dynasty kit with both adapters so I could use it down the road with new toy (Dynasty 200 DX) and current Multimatic 200.
      Thanks.

      Comment


      • #4
        miller tig contractor kit

        Back to same subject. If I get tig kit for multimatic 200, will it work with Dynasty DX 200 (assuming there are adaptors available)?
        After pricing it, kit for multimatic is cheaper

        Comment

        Working...
        X